BuildingCensus
A

A. W. Larson Building

Multifamily Housing in Seattle, WA · 3206 HARVARD AVE E · 98102

At a glance

A. W. Larson Building is a 34,618-square-foot multifamily housing building at 3206 HARVARD AVE E in Seattle, Washington, built in 2016. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 95 out of 100 (grade A), a site energy-use intensity of 23.5 kBtu/ft² and 5 tCO₂e of greenhouse-gas emissions. That score is higher than 61% of the 1,652 scored multifamily housing buildings in Seattle.

ENERGY STAR score
95
band A · 2025
Site EUI
23.5
kBtu/ft²
GHG emissions
5
tCO₂e
GHG intensity
0.1
kgCO₂e/ft²
Floor area
34,618
sq ft
Year built
2016
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score95 (band A)
Site EUI23.5 kBtu/ft²
Source EUI65.9 kBtu/ft²
GHG emissions5 tCO₂e
GHG intensity0.1 kgCO₂e/ft²
Electricity238,656 kWh
Gross floor area34,618 sq ft
Source recordseattle:50337:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest95-323.5 kBtu/ft²5 tCO₂e
202498+121.3 kBtu/ft²4 tCO₂e
202397+222.5 kBtu/ft²5 tCO₂e
202295+224.6 kBtu/ft²5 tCO₂e
202193+1025.4 kBtu/ft²5 tCO₂e
202083-528.2 kBtu/ft²6 tCO₂e
201988+226.4 kBtu/ft²6 tCO₂e
20188626.7 kBtu/ft²6 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
3206 HARVARD AVE E
State
Washington
ZIP
98102
Coordinates
47.65026, -122.32190

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does A. W. Larson Building compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. A. W. Larson Building's ENERGY STAR score of 95 compares with an average of 83 across the 1,652 that report a score; it scores higher than 61% of them and lower than 35%. Its site EUI of 23.5 kBtu/ft² is about 33% below the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.1 kgCO₂e/ft² is about 80% below the group average of 0.7 kgCO₂e/ft².

At 34,618 sq ft, it is about 60% below the average floor area of 86,468 sq ft for those buildings. It was built in 2016, 33 years later than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has A. W. Larson Building's energy performance changed over time?

BuildingCensus holds 8 Seattle disclosures for A. W. Larson Building, covering report years 2018–2025. Its ENERGY STAR score went from 86 in 2018 to 95 in 2025 (+9 points); its best year on file was 2024, at 98. Site EUI moved from 26.7 kBtu/ft² (2018) to 23.5 kBtu/ft² (2025), a 12% decrease. Reported emissions went from 6 tCO₂e to 5 tCO₂e over the same span (down 15%).

What does an ENERGY STAR score of 95 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 95 means the building performs better than about 95% of its national peers. BuildingCensus bands the score into report-card grades; 95 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. A. W. Larson Building's 23.5 kBtu/ft² across 34,618 sq ft works out to about 0.8 billion Btu (238 MWh-equivalent) in 2025. Its source EUI of 65.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 238,656 kWh of electricity for the year.

Which law requires A. W. Larson Building to report its energy use?

A. W. Larson Building reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:50337:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More multifamily housing buildings in Seattle

Frequently asked questions

What is A. W. Larson Building's energy grade?

A. W. Larson Building scores 95 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does A. W. Larson Building use?

Its 2025 site energy-use intensity was 23.5 kBtu/ft² (65.9 kBtu/ft² source) across 34,618 sq ft, including 238,656 kWh of electricity.

What are A. W. Larson Building's carbon emissions?

A. W. Larson Building reported 5 tCO₂e of greenhouse-gas emissions (0.1 kgCO₂e/ft²) for 2025.

Where is A. W. Larson Building?

A. W. Larson Building is at 3206 HARVARD AVE E, in Seattle, Washington 98102. Its coordinates are 47.65026, -122.32190 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is A. W. Larson Building and when was it built?

A. W. Larson Building has 34,618 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 2016 as its year built. It is classed as multifamily housing.

Is A. W. Larson Building covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “A. W. Larson Building, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/a-w-larson-building-0cf2cb72 (data as of October 2, 2026).