Kingway Apts

How does Kingway Apts compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Kingway Apts's ENERGY STAR score of 73 compares with an average of 83 across the 1,652 that report a score; it scores higher than 21% of them and lower than 78%. Its site EUI of 29.9 kBtu/ft² is about 14% below the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.2 kgCO₂e/ft² is about 73% below the group average of 0.7 kgCO₂e/ft².

At 191,330 sq ft, it is about 121% above the average floor area of 86,468 sq ft for those buildings. It was built in 1964, 19 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Kingway Apts's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Kingway Apts, covering report years 2015–2025. Its ENERGY STAR score went from 55 in 2015 to 73 in 2025 (+18 points); its best year on file was 2019, at 73. Site EUI moved from 31.5 kBtu/ft² (2015) to 29.9 kBtu/ft² (2025), a 5% decrease. Reported emissions went from 45 tCO₂e to 36 tCO₂e over the same span (down 20%).

What does an ENERGY STAR score of 73 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 73 means the building performs better than about 73% of its national peers. BuildingCensus bands the score into report-card grades; 73 falls in band B — above median (70–84). It sits 2 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Kingway Apts's 29.9 kBtu/ft² across 191,330 sq ft works out to about 5.7 billion Btu (1,677 MWh-equivalent) in 2025. Its source EUI of 83.0 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,653,409 kWh of electricity and 731 therms of natural gas for the year.

Which law requires Kingway Apts to report its energy use?

Kingway Apts reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:24854:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.