BuildingCensus
A

Lee And Lee Apartments

Multifamily Housing in Seattle, WA · 4145 11TH AVE NE · 98105

At a glance

Lee And Lee Apartments is a 24,548-square-foot multifamily housing building at 4145 11TH AVE NE in Seattle, Washington, built in 1941. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 100 out of 100 (grade A), a site energy-use intensity of 22.9 kBtu/ft² and 3 tCO₂e of greenhouse-gas emissions. That score is higher than 88% of the 1,652 scored multifamily housing buildings in Seattle.

ENERGY STAR score
100
band A · 2025
Site EUI
22.9
kBtu/ft²
GHG emissions
3
tCO₂e
GHG intensity
0.1
kgCO₂e/ft²
Floor area
24,548
sq ft
Year built
1941
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score100 (band A)
Site EUI22.9 kBtu/ft²
Source EUI64.1 kBtu/ft²
GHG emissions3 tCO₂e
GHG intensity0.1 kgCO₂e/ft²
Electricity164,654 kWh
Gross floor area24,548 sq ft
Source recordseattle:20296:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest100+122.9 kBtu/ft²3 tCO₂e
202499+124.7 kBtu/ft²4 tCO₂e
202398+927.2 kBtu/ft²4 tCO₂e
202289-634.3 kBtu/ft²5 tCO₂e
202195-329.9 kBtu/ft²4 tCO₂e
202098+325.6 kBtu/ft²4 tCO₂e
201995±029.5 kBtu/ft²4 tCO₂e
201895+1029.4 kBtu/ft²4 tCO₂e
201785±034.9 kBtu/ft²5 tCO₂e
201685-633.1 kBtu/ft²5 tCO₂e
20159130.6 kBtu/ft²4 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
4145 11TH AVE NE
State
Washington
ZIP
98105
Coordinates
47.65807, -122.31713

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does Lee And Lee Apartments compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Lee And Lee Apartments's ENERGY STAR score of 100 compares with an average of 83 across the 1,652 that report a score; it scores higher than 88% of them. Its site EUI of 22.9 kBtu/ft² is about 34% below the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.1 kgCO₂e/ft² is about 81% below the group average of 0.7 kgCO₂e/ft².

At 24,548 sq ft, it is about 72% below the average floor area of 86,468 sq ft for those buildings. It was built in 1941, 42 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Lee And Lee Apartments's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Lee And Lee Apartments, covering report years 2015–2025. Its ENERGY STAR score went from 91 in 2015 to 100 in 2025 (+9 points). Site EUI moved from 30.6 kBtu/ft² (2015) to 22.9 kBtu/ft² (2025), a 25% decrease. Reported emissions went from 4 tCO₂e to 3 tCO₂e over the same span (down 27%).

What does an ENERGY STAR score of 100 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: 100 is the top of the scale. BuildingCensus bands the score into report-card grades; 100 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Lee And Lee Apartments's 22.9 kBtu/ft² across 24,548 sq ft works out to about 0.6 billion Btu (165 MWh-equivalent) in 2025. Its source EUI of 64.1 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 164,654 kWh of electricity for the year.

Which law requires Lee And Lee Apartments to report its energy use?

Lee And Lee Apartments reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:20296:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More multifamily housing buildings in Seattle

Frequently asked questions

What is Lee And Lee Apartments's energy grade?

Lee And Lee Apartments scores 100 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Lee And Lee Apartments use?

Its 2025 site energy-use intensity was 22.9 kBtu/ft² (64.1 kBtu/ft² source) across 24,548 sq ft, including 164,654 kWh of electricity.

What are Lee And Lee Apartments's carbon emissions?

Lee And Lee Apartments reported 3 tCO₂e of greenhouse-gas emissions (0.1 kgCO₂e/ft²) for 2025.

Where is Lee And Lee Apartments?

Lee And Lee Apartments is at 4145 11TH AVE NE, in Seattle, Washington 98105. Its coordinates are 47.65807, -122.31713 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Lee And Lee Apartments and when was it built?

Lee And Lee Apartments has 24,548 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1941 as its year built. It is classed as multifamily housing.

Is Lee And Lee Apartments covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Lee And Lee Apartments, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/lee-and-lee-apartments-c206522d (data as of October 2, 2026).