Mercerview Apts

How does Mercerview Apts compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Mercerview Apts's ENERGY STAR score of 94 compares with an average of 83 across the 1,652 that report a score; it scores higher than 58% of them and lower than 39%. Its site EUI of 32.1 kBtu/ft² is roughly in line with the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.4 kgCO₂e/ft² is about half of the group average of 0.7 kgCO₂e/ft².

At 79,402 sq ft, it is roughly in line with the average floor area of 86,468 sq ft for those buildings. It was built in 2001, 18 years later than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Mercerview Apts's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Mercerview Apts, covering report years 2015–2025. Its ENERGY STAR score went from 52 in 2015 to 94 in 2025 (+42 points). Site EUI moved from 39.5 kBtu/ft² (2015) to 32.1 kBtu/ft² (2025), a 19% decrease. Reported emissions went from 38 tCO₂e to 23 tCO₂e over the same span (down 40%).

What does an ENERGY STAR score of 94 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 94 means the building performs better than about 94% of its national peers. BuildingCensus bands the score into report-card grades; 94 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Mercerview Apts's 32.1 kBtu/ft² across 79,402 sq ft works out to about 2.5 billion Btu (747 MWh-equivalent) in 2025. Its source EUI of 82.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 485,021 kWh of electricity and 2,562 therms of natural gas for the year.

Which law requires Mercerview Apts to report its energy use?

Mercerview Apts reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:21731:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.