BuildingCensus
D

Sea Housing Authority Apt Bldg

Multifamily Housing in Seattle, WA · 620 N 130TH ST · 98133

At a glance

Sea Housing Authority Apt Bldg is a 59,301-square-foot multifamily housing building at 620 N 130TH ST in Seattle, Washington, built in 1983. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 50 out of 100 (grade D), a site energy-use intensity of 34.2 kBtu/ft² and 12 tCO₂e of greenhouse-gas emissions. That score is higher than 8% of the 1,652 scored multifamily housing buildings in Seattle.

ENERGY STAR score
50
band D · 2025
Site EUI
34.2
kBtu/ft²
GHG emissions
12
tCO₂e
GHG intensity
0.2
kgCO₂e/ft²
Floor area
59,301
sq ft
Year built
1983
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score50 (band D)
Site EUI34.2 kBtu/ft²
Source EUI95.8 kBtu/ft²
GHG emissions12 tCO₂e
GHG intensity0.2 kgCO₂e/ft²
Electricity594,894 kWh
Gross floor area59,301 sq ft
Source recordseattle:21234:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest50+334.2 kBtu/ft²12 tCO₂e
202447-733.4 kBtu/ft²12 tCO₂e
202354-232.7 kBtu/ft²11 tCO₂e
202256±033.9 kBtu/ft²12 tCO₂e
202156-333.6 kBtu/ft²12 tCO₂e
202059-332.0 kBtu/ft²11 tCO₂e
201962+531.6 kBtu/ft²11 tCO₂e
201857+232.7 kBtu/ft²11 tCO₂e
201755+434.0 kBtu/ft²12 tCO₂e
201651-131.5 kBtu/ft²11 tCO₂e
20155231.4 kBtu/ft²11 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
620 N 130TH ST
State
Washington
ZIP
98133
Coordinates
47.72376, -122.35102

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does Sea Housing Authority Apt Bldg compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Sea Housing Authority Apt Bldg's ENERGY STAR score of 50 compares with an average of 83 across the 1,652 that report a score; it scores higher than 8% of them and lower than 92%. Its site EUI of 34.2 kBtu/ft² is roughly in line with the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.2 kgCO₂e/ft² is about 71% below the group average of 0.7 kgCO₂e/ft².

At 59,301 sq ft, it is about 31% below the average floor area of 86,468 sq ft for those buildings. Its 1983 construction date is close to the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Sea Housing Authority Apt Bldg's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Sea Housing Authority Apt Bldg, covering report years 2015–2025. Its ENERGY STAR score went from 52 in 2015 to 50 in 2025 (-2 points); its best year on file was 2019, at 62. Site EUI moved from 31.4 kBtu/ft² (2015) to 34.2 kBtu/ft² (2025), an 9% increase. Reported emissions went from 11 tCO₂e to 12 tCO₂e over the same span (up 9%).

What does an ENERGY STAR score of 50 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 50 means the building performs better than about 50% of its national peers. BuildingCensus bands the score into report-card grades; 50 falls in band D — lowest band (1–54). It sits 25 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Sea Housing Authority Apt Bldg's 34.2 kBtu/ft² across 59,301 sq ft works out to about 2 billion Btu (594 MWh-equivalent) in 2025. Its source EUI of 95.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 594,894 kWh of electricity for the year.

Which law requires Sea Housing Authority Apt Bldg to report its energy use?

Sea Housing Authority Apt Bldg reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:21234:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More multifamily housing buildings in Seattle

Frequently asked questions

What is Sea Housing Authority Apt Bldg's energy grade?

Sea Housing Authority Apt Bldg scores 50 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Sea Housing Authority Apt Bldg use?

Its 2025 site energy-use intensity was 34.2 kBtu/ft² (95.8 kBtu/ft² source) across 59,301 sq ft, including 594,894 kWh of electricity.

What are Sea Housing Authority Apt Bldg's carbon emissions?

Sea Housing Authority Apt Bldg reported 12 tCO₂e of greenhouse-gas emissions (0.2 kgCO₂e/ft²) for 2025.

Where is Sea Housing Authority Apt Bldg?

Sea Housing Authority Apt Bldg is at 620 N 130TH ST, in Seattle, Washington 98133. Its coordinates are 47.72376, -122.35102 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Sea Housing Authority Apt Bldg and when was it built?

Sea Housing Authority Apt Bldg has 59,301 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1983 as its year built. It is classed as multifamily housing.

Is Sea Housing Authority Apt Bldg covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Sea Housing Authority Apt Bldg, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/sea-housing-authority-apt-bldg-51c8f8ba (data as of October 2, 2026).