BuildingCensus
D

Shannon Condominium

Multifamily Housing in Seattle, WA · 601 BELMONT AVE E · 98102

At a glance

Shannon Condominium is a 97,160-square-foot multifamily housing building at 601 BELMONT AVE E in Seattle, Washington, built in 1970. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 10 out of 100 (grade D), a site energy-use intensity of 50.3 kBtu/ft² and 23 tCO₂e of greenhouse-gas emissions. That score is higher than 0% of the 1,652 scored multifamily housing buildings in Seattle.

ENERGY STAR score
10
band D · 2025
Site EUI
50.3
kBtu/ft²
GHG emissions
23
tCO₂e
GHG intensity
0.3
kgCO₂e/ft²
Floor area
97,160
sq ft
Year built
1970
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score10 (band D)
Site EUI50.3 kBtu/ft²
Source EUI140.9 kBtu/ft²
GHG emissions23 tCO₂e
GHG intensity0.3 kgCO₂e/ft²
Electricity1,191,180 kWh
Gross floor area97,160 sq ft
Source recordseattle:23641:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest10-150.3 kBtu/ft²23 tCO₂e
202411±049.3 kBtu/ft²23 tCO₂e
202311+150.6 kBtu/ft²24 tCO₂e
202210+452.4 kBtu/ft²25 tCO₂e
20216-1255.5 kBtu/ft²26 tCO₂e
202018-140.3 kBtu/ft²25 tCO₂e
201919±040.5 kBtu/ft²25 tCO₂e
201819-340.1 kBtu/ft²25 tCO₂e
201722+541.0 kBtu/ft²26 tCO₂e
201617-1236.8 kBtu/ft²23 tCO₂e
20152936.2 kBtu/ft²23 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
601 BELMONT AVE E
State
Washington
ZIP
98102
Coordinates
47.62464, -122.32444

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does Shannon Condominium compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Shannon Condominium's ENERGY STAR score of 10 compares with an average of 83 across the 1,652 that report a score; it scores higher than 0% of them and lower than 99%. Its site EUI of 50.3 kBtu/ft² is about 44% above the average of 34.9 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 0.3 kgCO₂e/ft² is about 59% below the group average of 0.7 kgCO₂e/ft².

At 97,160 sq ft, it is about 12% above the average floor area of 86,468 sq ft for those buildings. It was built in 1970, 13 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Shannon Condominium's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Shannon Condominium, covering report years 2015–2025. Its ENERGY STAR score went from 29 in 2015 to 10 in 2025 (-19 points); its best year on file was 2015, at 29. Site EUI moved from 36.2 kBtu/ft² (2015) to 50.3 kBtu/ft² (2025), an 39% increase. Reported emissions went from 23 tCO₂e to 23 tCO₂e over the same span (up 2%).

What does an ENERGY STAR score of 10 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 10 means the building performs better than about 10% of its national peers. BuildingCensus bands the score into report-card grades; 10 falls in band D — lowest band (1–54). It sits 65 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Shannon Condominium's 50.3 kBtu/ft² across 97,160 sq ft works out to about 4.9 billion Btu (1,432 MWh-equivalent) in 2025. Its source EUI of 140.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,191,180 kWh of electricity for the year.

Which law requires Shannon Condominium to report its energy use?

Shannon Condominium reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:23641:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More multifamily housing buildings in Seattle

Frequently asked questions

What is Shannon Condominium's energy grade?

Shannon Condominium scores 10 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Shannon Condominium use?

Its 2025 site energy-use intensity was 50.3 kBtu/ft² (140.9 kBtu/ft² source) across 97,160 sq ft, including 1,191,180 kWh of electricity.

What are Shannon Condominium's carbon emissions?

Shannon Condominium reported 23 tCO₂e of greenhouse-gas emissions (0.3 kgCO₂e/ft²) for 2025.

Where is Shannon Condominium?

Shannon Condominium is at 601 BELMONT AVE E, in Seattle, Washington 98102. Its coordinates are 47.62464, -122.32444 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Shannon Condominium and when was it built?

Shannon Condominium has 97,160 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1970 as its year built. It is classed as multifamily housing.

Is Shannon Condominium covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Shannon Condominium, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/shannon-condominium-c5e54cb3 (data as of October 2, 2026).