The Maxwell Hotel - Seattle

How does The Maxwell Hotel - Seattle compare with other hotel buildings in Seattle?

The latest disclosures cover 86 hotel buildings in Seattle, out of 3,871 buildings citywide. The Maxwell Hotel - Seattle's ENERGY STAR score of 40 compares with an average of 76 across the 78 that report a score; it scores higher than 8% of them and lower than 90%. Its site EUI of 83.9 kBtu/ft² is about 23% above the average of 68.4 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 2.5 kgCO₂e/ft² is about 24% above the group average of 2.0 kgCO₂e/ft².

At 111,856 sq ft, it is about 33% below the average floor area of 165,912 sq ft for those buildings. It was built in 2008, 38 years later than the group's average year built (1971). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².

How has The Maxwell Hotel - Seattle's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for The Maxwell Hotel - Seattle, covering report years 2015–2025. Its ENERGY STAR score went from 43 in 2015 to 40 in 2025 (-3 points); its best year on file was 2020, at 86. Site EUI moved from 80.8 kBtu/ft² (2015) to 83.9 kBtu/ft² (2025), an 4% increase. Reported emissions went from 262 tCO₂e to 228 tCO₂e over the same span (down 13%).

What does an ENERGY STAR score of 40 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 40 means the building performs better than about 40% of its national peers. BuildingCensus bands the score into report-card grades; 40 falls in band D — lowest band (1–54). It sits 35 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The Maxwell Hotel - Seattle's 83.9 kBtu/ft² across 111,856 sq ft works out to about 9.4 billion Btu (2,750 MWh-equivalent) in 2025. Its source EUI of 159.7 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,103,803 kWh of electricity and 39,542 therms of natural gas for the year.

Which law requires The Maxwell Hotel - Seattle to report its energy use?

The Maxwell Hotel - Seattle reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:843:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.