The Shelby Apt

How does The Shelby Apt compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. The Shelby Apt's ENERGY STAR score of 100 compares with an average of 83 across the 1,652 that report a score; it scores higher than 88% of them. Its site EUI of 21.9 kBtu/ft² is about 37% below the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.7 kgCO₂e/ft² is roughly in line with the group average of 0.7 kgCO₂e/ft².

At 37,885 sq ft, it is about 56% below the average floor area of 86,468 sq ft for those buildings. It was built in 1928, 55 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has The Shelby Apt's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for The Shelby Apt, covering report years 2015–2025. Its ENERGY STAR score went from 86 in 2015 to 100 in 2025 (+14 points); its best year on file was 2021, at 100. Site EUI moved from 29.3 kBtu/ft² (2015) to 21.9 kBtu/ft² (2025), a 25% decrease. Reported emissions went from 32 tCO₂e to 23 tCO₂e over the same span (down 28%).

What does an ENERGY STAR score of 100 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: 100 is the top of the scale. BuildingCensus bands the score into report-card grades; 100 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The Shelby Apt's 21.9 kBtu/ft² across 37,885 sq ft works out to about 0.8 billion Btu (243 MWh-equivalent) in 2025. Its source EUI of 41.7 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 109,740 kWh of electricity and 3,919 therms of natural gas for the year.

Which law requires The Shelby Apt to report its energy use?

The Shelby Apt reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:20846:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.