BuildingCensus
A

Albert Building

Office in California, CA · 1010 B Street, San Rafael · 94901

At a glance

Albert Building is a 62,000-square-foot office building at 1010 B Street, San Rafael in San Rafael, California, built in 1930. In its 2024 California benchmarking disclosure it reported an ENERGY STAR score of 94 out of 100 (grade A), a site energy-use intensity of 24.8 kBtu/ft² and 99 tCO₂e of greenhouse-gas emissions. That score is higher than 75% of the 4,912 scored office buildings in California.

ENERGY STAR score
94
band A · 2024
Site EUI
24.8
kBtu/ft²
GHG emissions
99
tCO₂e
GHG intensity
1.6
kgCO₂e/ft²
Floor area
62,000
sq ft
Year built
1930
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score94 (band A)
Site EUI24.8 kBtu/ft²
Source EUI—
GHG emissions99 tCO₂e
GHG intensity1.6 kgCO₂e/ft²
Electricity380,063 kWh
Natural gas2,378 therms
Gross floor area62,000 sq ft
Source recordcalifornia:26656139:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest94-524.8 kBtu/ft²99 tCO₂e
202399-116.4 kBtu/ft²67 tCO₂e
202210015.4 kBtu/ft²61 tCO₂e

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1010 B Street, San Rafael
State
California
ZIP
94901
Coordinates
37.97348, -122.52918

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does Albert Building compare with other office buildings in California?

The latest disclosures cover 6,214 office buildings in California, out of 40,029 buildings citywide. Albert Building's ENERGY STAR score of 94 compares with an average of 75 across the 4,912 that report a score; it scores higher than 75% of them and lower than 22%. Its site EUI of 24.8 kBtu/ft² is about 56% below the average of 56.4 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 1.6 kgCO₂e/ft² is about 56% below the group average of 3.6 kgCO₂e/ft².

At 62,000 sq ft, it is about 59% below the average floor area of 151,937 sq ft for those buildings. It was built in 1930, 55 years earlier than the group's average year built (1985). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has Albert Building's energy performance changed over time?

BuildingCensus holds 3 California disclosures for Albert Building, covering report years 2022–2024. Its ENERGY STAR score went from 100 in 2022 to 94 in 2024 (-6 points); its best year on file was 2022, at 100. Site EUI moved from 15.4 kBtu/ft² (2022) to 24.8 kBtu/ft² (2024), an 61% increase. Reported emissions went from 61 tCO₂e to 99 tCO₂e over the same span (up 61%).

What does an ENERGY STAR score of 94 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 94 means the building performs better than about 94% of its national peers. BuildingCensus bands the score into report-card grades; 94 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Albert Building's 24.8 kBtu/ft² across 62,000 sq ft works out to about 1.5 billion Btu (451 MWh-equivalent) in 2024. The disclosure also reports 380,063 kWh of electricity and 2,378 therms of natural gas for the year.

Which law requires Albert Building to report its energy use?

Albert Building reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:26656139:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More office buildings in California

Frequently asked questions

What is Albert Building's energy grade?

Albert Building scores 94 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Albert Building use?

Its 2024 site energy-use intensity was 24.8 kBtu/ft² across 62,000 sq ft, including 380,063 kWh of electricity and 2,378 therms of natural gas.

What are Albert Building's carbon emissions?

Albert Building reported 99 tCO₂e of greenhouse-gas emissions (1.6 kgCO₂e/ft²) for 2024.

Where is Albert Building?

Albert Building is at 1010 B Street, San Rafael, in San Rafael, California 94901. Its coordinates are 37.97348, -122.52918 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is Albert Building and when was it built?

Albert Building has 62,000 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1930 as its year built. It is classed as office.

Is Albert Building covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2024 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Albert Building, San Rafael, California — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/california/albert-building-e2cf1d4f (data as of July 9, 2026).