BuildingCensus
D

Andaz San Diego

Hotel in California, CA · 600 F Street, San Diego · 92101

At a glance

Andaz San Diego is a 160,319-square-foot hotel at 600 F Street, San Diego in San Diego, California, built in 2007. In its 2024 California benchmarking disclosure it reported an ENERGY STAR score of 54 out of 100 (grade D), a site energy-use intensity of 86.4 kBtu/ft² and 844 tCO₂e of greenhouse-gas emissions. That score is higher than 21% of the 1,525 scored hotel buildings in California.

ENERGY STAR score
54
band D · 2024
Site EUI
86.4
kBtu/ft²
GHG emissions
844
tCO₂e
GHG intensity
5.3
kgCO₂e/ft²
Floor area
160,319
sq ft
Year built
2007
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score54 (band D)
Site EUI86.4 kBtu/ft²
Source EUI—
GHG emissions844 tCO₂e
GHG intensity5.3 kgCO₂e/ft²
Electricity2,315,874 kWh
Gross floor area160,319 sq ft
Source recordcalifornia:4407191:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest5486.4 kBtu/ft²844 tCO₂e
2023—93.3 kBtu/ft²—
202247-1792.8 kBtu/ft²922 tCO₂e
202164-1780.1 kBtu/ft²736 tCO₂e
202081+3369.2 kBtu/ft²638 tCO₂e
201948+189.0 kBtu/ft²905 tCO₂e
20184793.1 kBtu/ft²937 tCO₂e

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
600 F Street, San Diego
State
California
ZIP
92101
Coordinates
32.71387, -117.15892

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does Andaz San Diego compare with other hotel buildings in California?

The latest disclosures cover 1,599 hotel buildings in California, out of 40,029 buildings citywide. Andaz San Diego's ENERGY STAR score of 54 compares with an average of 74 across the 1,525 that report a score; it scores higher than 21% of them and lower than 78%. Its site EUI of 86.4 kBtu/ft² is about 32% above the average of 65.6 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 5.3 kgCO₂e/ft² is about 32% above the group average of 4.0 kgCO₂e/ft².

At 160,319 sq ft, it is roughly in line with the average floor area of 167,786 sq ft for those buildings. It was built in 2007, 19 years later than the group's average year built (1988). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².

How has Andaz San Diego's energy performance changed over time?

BuildingCensus holds 7 California disclosures for Andaz San Diego, covering report years 2018–2024. Its ENERGY STAR score went from 47 in 2018 to 54 in 2024 (+7 points); its best year on file was 2020, at 81. Site EUI moved from 93.1 kBtu/ft² (2018) to 86.4 kBtu/ft² (2024), a 7% decrease. Reported emissions went from 937 tCO₂e to 844 tCO₂e over the same span (down 10%).

What does an ENERGY STAR score of 54 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 54 means the building performs better than about 54% of its national peers. BuildingCensus bands the score into report-card grades; 54 falls in band D — lowest band (1–54). It sits 21 points below 75, the threshold for ENERGY STAR certification. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Andaz San Diego's 86.4 kBtu/ft² across 160,319 sq ft works out to about 13.9 billion Btu (4,059 MWh-equivalent) in 2024. The disclosure also reports 2,315,874 kWh of electricity for the year.

Which law requires Andaz San Diego to report its energy use?

Andaz San Diego reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:4407191:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More hotel buildings in California

Frequently asked questions

What is Andaz San Diego's energy grade?

Andaz San Diego scores 54 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Andaz San Diego use?

Its 2024 site energy-use intensity was 86.4 kBtu/ft² across 160,319 sq ft, including 2,315,874 kWh of electricity.

What are Andaz San Diego's carbon emissions?

Andaz San Diego reported 844 tCO₂e of greenhouse-gas emissions (5.3 kgCO₂e/ft²) for 2024.

Where is Andaz San Diego?

Andaz San Diego is at 600 F Street, San Diego, in San Diego, California 92101. Its coordinates are 32.71387, -117.15892 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is Andaz San Diego and when was it built?

Andaz San Diego has 160,319 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2007 as its year built. It is classed as hotel.

Is Andaz San Diego covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2024 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Andaz San Diego, San Diego, California — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/california/andaz-san-diego-b2f9c569 (data as of July 9, 2026).