Belvedere Place
Office in California, CA · 2 Belvedere Place, Mill Valley · 94941
At a glance
Belvedere Place is a 81,012-square-foot office building at 2 Belvedere Place, Mill Valley in Mill Valley, California, built in 2001. In its 2024 California benchmarking disclosure it reported an ENERGY STAR score of 93 out of 100 (grade A) and 318 tCO₂e of greenhouse-gas emissions. That score is higher than 72% of the 4,912 scored office buildings in California.
AB 802 (Public Resources Code §25402.10) · reporting year 2024
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 93 (band A) |
| Site EUI | — |
| Source EUI | — |
| GHG emissions | 318 tCO₂e |
| GHG intensity | 1.8 kgCO₂e/ft² |
| Electricity | 907,185 kWh |
| Natural gas | 21,228 therms |
| Gross floor area | 81,012 sq ft |
| Source record | california:6097892:2024 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2024latest | 93 | +3 | — | 318 tCO₂e |
| 2023 | 90 | +21 | 29.5 kBtu/ft² | 370 tCO₂e |
| 2020 | 69 | 75.1 kBtu/ft² | 454 tCO₂e | |
| 2019 | — | — | — |
Compliance context
AB 802 (Public Resources Code §25402.10)
AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.
Ownership
No owning organisation shown. Names of private individuals in the disclosure are not published here.
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 2 Belvedere Place, Mill Valley
- City
- California
- State
- California
- ZIP
- 94941
- Coordinates
- 37.89511, -122.51420
Within ~1 km
Nearby benchmarked buildings
Multifamily Housing · 175,802 sq ft
- Belvedere Placescore —
Office · 97,000 sq ft
- Shelter Hill - Totalscore 97
Multifamily Housing · 65,145 sq ft
See also: most efficient in California · biggest emitters
How does Belvedere Place compare with other office buildings in California?
The latest disclosures cover 6,214 office buildings in California, out of 40,029 buildings citywide. Belvedere Place's ENERGY STAR score of 93 compares with an average of 75 across the 4,912 that report a score; it scores higher than 72% of them and lower than 25%. Its emissions intensity of 1.8 kgCO₂e/ft² is about half of the group average of 3.6 kgCO₂e/ft².
At 81,012 sq ft, it is about half of the average floor area of 151,937 sq ft for those buildings. It was built in 2001, 16 years later than the group's average year built (1985). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².
How has Belvedere Place's energy performance changed over time?
BuildingCensus holds 4 California disclosures for Belvedere Place, covering report years 2019, 2020, 2023, 2024. Its ENERGY STAR score went from 69 in 2020 to 93 in 2024 (+24 points). Site EUI moved from 75.1 kBtu/ft² (2020) to 29.5 kBtu/ft² (2023), a 61% decrease. Reported emissions went from 454 tCO₂e to 318 tCO₂e over the same span (down 30%).
What does an ENERGY STAR score of 93 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 93 means the building performs better than about 93% of its national peers. BuildingCensus bands the score into report-card grades; 93 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In California, 65% of scored buildings are at 75 or above.
Which law requires Belvedere Place to report its energy use?
Belvedere Place reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:6097892:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.
More office buildings in California
- 1900 Mccarthy· 80,985 sq ft · EUI 45.5 kBtu/ft²
- 15545 Sand Canyon Verizon Bldg B· 80,984 sq ft · EUI 100.8 kBtu/ft²
- 15525 Sand Canyon Bldg E· 80,984 sq ft
- Adm/Glc 410484/15545 Sand Canyon-Bldg B/Irvine/Ca· 80,984 sq ft · score 44 (D)
- Senita Gateway Center A· 80,950 sq ft · score 85 (A)
- 3833 N 1St St - Infineon· 80,908 sq ft · score 86 (A)
- Office buildings in California· 6,214 benchmarked
- All California benchmarked buildings· AB 802 (Public Resources Code §25402.10)
- Most efficient large buildings in California
- Least efficient large buildings in California
- Biggest emitters in California
Frequently asked questions
What is Belvedere Place's energy grade?
Belvedere Place scores 93 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Belvedere Place use?
No energy-use intensity was reported for 2024.
What are Belvedere Place's carbon emissions?
Belvedere Place reported 318 tCO₂e of greenhouse-gas emissions (1.8 kgCO₂e/ft²) for 2024.
Where is Belvedere Place?
Belvedere Place is at 2 Belvedere Place, Mill Valley, in Mill Valley, California 94941. Its coordinates are 37.89511, -122.51420 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.
How big is Belvedere Place and when was it built?
Belvedere Place has 81,012 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2001 as its year built. It is classed as office.
Is Belvedere Place covered by AB 802 (Public Resources Code §25402.10)?
Yes — it appears in the 2024 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).
Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Belvedere Place, Mill Valley, California — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/california/belvedere-place-58c20afe (data as of July 9, 2026).