BuildingCensus
D

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support

Office in California, CA · 4800 Oak Grove Drive, Pasadena · 91109

At a glance

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support is a 66,114-square-foot office building at 4800 Oak Grove Drive, Pasadena in Pasadena, California, built in 1958. In its 2022 California benchmarking disclosure it reported an ENERGY STAR score of 16 out of 100 (grade D), a site energy-use intensity of 93.9 kBtu/ft² and 426 tCO₂e of greenhouse-gas emissions. That score is higher than 6% of the 4,912 scored office buildings in California.

ENERGY STAR score
16
band D · 2022
Site EUI
93.9
kBtu/ft²
GHG emissions
426
tCO₂e
GHG intensity
6.4
kgCO₂e/ft²
Floor area
66,114
sq ft
Year built
1958
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2022

Benchmarking record

FieldValue
ENERGY STAR score16 (band D)
Site EUI93.9 kBtu/ft²
Source EUI—
GHG emissions426 tCO₂e
GHG intensity6.4 kgCO₂e/ft²
Electricity1,820,124 kWh
Gross floor area66,114 sq ft
Source recordcalifornia:2926616:2022

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
4800 Oak Grove Drive, Pasadena
State
California
ZIP
91109
Coordinates
34.19755, -118.17316

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support compare with other office buildings in California?

The latest disclosures cover 6,214 office buildings in California, out of 40,029 buildings citywide. Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support's ENERGY STAR score of 16 compares with an average of 75 across the 4,912 that report a score; it scores higher than 6% of them and lower than 94%. Its site EUI of 93.9 kBtu/ft² is about 66% above the average of 56.4 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 6.4 kgCO₂e/ft² is about 78% above the group average of 3.6 kgCO₂e/ft².

At 66,114 sq ft, it is about 56% below the average floor area of 151,937 sq ft for those buildings. It was built in 1958, 27 years earlier than the group's average year built (1985). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

What does an ENERGY STAR score of 16 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 16 means the building performs better than about 16% of its national peers. BuildingCensus bands the score into report-card grades; 16 falls in band D — lowest band (1–54). It sits 59 points below 75, the threshold for ENERGY STAR certification. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support's 93.9 kBtu/ft² across 66,114 sq ft works out to about 6.2 billion Btu (1,819 MWh-equivalent) in 2022. The disclosure also reports 1,820,124 kWh of electricity for the year.

Which law requires Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support to report its energy use?

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2022 disclosure (source record california:2926616:2022). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More office buildings in California

Frequently asked questions

What is Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support's energy grade?

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support scores 16 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2022 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support use?

Its 2022 site energy-use intensity was 93.9 kBtu/ft² across 66,114 sq ft, including 1,820,124 kWh of electricity.

What are Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support's carbon emissions?

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support reported 426 tCO₂e of greenhouse-gas emissions (6.4 kgCO₂e/ft²) for 2022.

Where is Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support?

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support is at 4800 Oak Grove Drive, Pasadena, in Pasadena, California 91109. Its coordinates are 34.19755, -118.17316 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support and when was it built?

Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support has 66,114 sq ft of gross floor area, as reported in its 2022 disclosure. The disclosure lists 1958 as its year built. It is classed as office.

Is Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2022 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Jet Propulsion Laboratory-1049/55/11-125-Combined Engineering Support, Pasadena, California — 2022 benchmarking disclosure”, https://buildingcensus.com/buildings/california/jet-propulsion-laboratory-1049-55-11-125-combined-engineering-support-078a2078 (data as of July 9, 2026).