BuildingCensus
A

Robert M. Pyles

K-12 School in California, CA · 10411 S. Dale St., Stanton · 90680

At a glance

Robert M. Pyles is a 52,055-square-foot K-12 school at 10411 S. Dale St., Stanton in Stanton, California, built in 1958. In its 2024 California benchmarking disclosure it reported an ENERGY STAR score of 94 out of 100 (grade A), a site energy-use intensity of 15.5 kBtu/ft² and 52 tCO₂e of greenhouse-gas emissions. That score is higher than 75% of the 2,016 scored K-12 school buildings in California.

ENERGY STAR score
94
band A · 2024
Site EUI
15.5
kBtu/ft²
GHG emissions
52
tCO₂e
GHG intensity
1.0
kgCO₂e/ft²
Floor area
52,055
sq ft
Year built
1958
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

AB 802 (Public Resources Code §25402.10) · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score94 (band A)
Site EUI15.5 kBtu/ft²
Source EUI—
GHG emissions52 tCO₂e
GHG intensity1.0 kgCO₂e/ft²
Electricity181,225 kWh
Natural gas2,096 therms
Gross floor area52,055 sq ft
Source recordcalifornia:55234692:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest94+215.5 kBtu/ft²52 tCO₂e
20239216.1 kBtu/ft²55 tCO₂e

Compliance context

AB 802 (Public Resources Code §25402.10)

AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
10411 S. Dale St., Stanton
State
California
ZIP
90680
Coordinates
33.81119, -117.98604

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in California · biggest emitters

How does Robert M. Pyles compare with other K-12 school buildings in California?

The latest disclosures cover 2,128 K-12 school buildings in California, out of 40,029 buildings citywide. Robert M. Pyles's ENERGY STAR score of 94 compares with an average of 74 across the 2,016 that report a score; it scores higher than 75% of them and lower than 22%. Its site EUI of 15.5 kBtu/ft² is about 55% below the average of 34.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 1.0 kgCO₂e/ft² is about half of the group average of 2.0 kgCO₂e/ft².

At 52,055 sq ft, it is about 60% below the average floor area of 129,123 sq ft for those buildings. It was built in 1958, 18 years earlier than the group's average year built (1976). Across all 24 jurisdictions BuildingCensus covers, the 6,548 K-12 school buildings average an ENERGY STAR score of 64 and a site EUI of 52.7 kBtu/ft².

How has Robert M. Pyles's energy performance changed over time?

BuildingCensus holds 2 California disclosures for Robert M. Pyles, covering report years 2023–2024. Its ENERGY STAR score went from 92 in 2023 to 94 in 2024 (+2 points). Site EUI moved from 16.1 kBtu/ft² (2023) to 15.5 kBtu/ft² (2024), a 4% decrease. Reported emissions went from 55 tCO₂e to 52 tCO₂e over the same span (down 5%).

What does an ENERGY STAR score of 94 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 94 means the building performs better than about 94% of its national peers. BuildingCensus bands the score into report-card grades; 94 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In California, 65% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Robert M. Pyles's 15.5 kBtu/ft² across 52,055 sq ft works out to about 0.8 billion Btu (236 MWh-equivalent) in 2024. The disclosure also reports 181,225 kWh of electricity and 2,096 therms of natural gas for the year.

Which law requires Robert M. Pyles to report its energy use?

Robert M. Pyles reports under AB 802 (Public Resources Code §25402.10), the legal basis of California's Building Energy Benchmarking Program (statewide), which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record california:55234692:2024). AB 802 requires every California commercial building over 50,000 sq ft to report energy use to the CEC annually; the CEC publicly discloses the results statewide.

More K-12 school buildings in California

Frequently asked questions

What is Robert M. Pyles's energy grade?

Robert M. Pyles scores 94 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 California disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Robert M. Pyles use?

Its 2024 site energy-use intensity was 15.5 kBtu/ft² across 52,055 sq ft, including 181,225 kWh of electricity and 2,096 therms of natural gas.

What are Robert M. Pyles's carbon emissions?

Robert M. Pyles reported 52 tCO₂e of greenhouse-gas emissions (1.0 kgCO₂e/ft²) for 2024.

Where is Robert M. Pyles?

Robert M. Pyles is at 10411 S. Dale St., Stanton, in Stanton, California 90680. Its coordinates are 33.81119, -117.98604 (latitude, longitude), as published in the Building Energy Benchmarking Program (statewide) file.

How big is Robert M. Pyles and when was it built?

Robert M. Pyles has 52,055 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1958 as its year built. It is classed as K-12 school.

Is Robert M. Pyles covered by AB 802 (Public Resources Code §25402.10)?

Yes — it appears in the 2024 Building Energy Benchmarking Program (statewide) disclosure, which lists the buildings reporting under AB 802 (Public Resources Code §25402.10).

Working with California building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking Program (statewide) (AB 802 (Public Resources Code §25402.10)), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Robert M. Pyles, Stanton, California — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/california/robert-m-pyles-56425ebd (data as of July 9, 2026).