BuildingCensus
–

F & O Inc

Other in Seattle, WA · 1020 1ST AVE S · 98134

At a glance

F & O Inc is a 44,775-square-foot other building at 1020 1ST AVE S in Seattle, Washington, built in 1909. In its 2025 Seattle benchmarking disclosure it reported a site energy-use intensity of 15.9 kBtu/ft² and 19 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2025
Site EUI
15.9
kBtu/ft²
GHG emissions
19
tCO₂e
GHG intensity
0.4
kgCO₂e/ft²
Floor area
44,775
sq ft
Year built
1909
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI15.9 kBtu/ft²
Source EUI31.4 kBtu/ft²
GHG emissions19 tCO₂e
GHG intensity0.4 kgCO₂e/ft²
Electricity110,668 kWh
Natural gas3,322 therms
Gross floor area44,775 sq ft
Source recordseattle:24710:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest—15.9 kBtu/ft²19 tCO₂e
2024—15.1 kBtu/ft²17 tCO₂e
2023——2 tCO₂e
2022———
2021———
2020—10.2 kBtu/ft²12 tCO₂e
2019—12.8 kBtu/ft²16 tCO₂e
2018—14.2 kBtu/ft²19 tCO₂e
2017—23.0 kBtu/ft²37 tCO₂e
2016—21.2 kBtu/ft²29 tCO₂e
2015—20.2 kBtu/ft²25 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1020 1ST AVE S
State
Washington
ZIP
98134
Coordinates
47.59347, -122.33369

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does F & O Inc compare with other other buildings in Seattle?

The latest disclosures cover 45 other buildings in Seattle, out of 3,871 buildings citywide. Its site EUI of 15.9 kBtu/ft² is about 73% below the average of 59.4 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.4 kgCO₂e/ft² is about 61% below the group average of 1.1 kgCO₂e/ft².

At 44,775 sq ft, it is about 20% below the average floor area of 55,708 sq ft for those buildings. It was built in 1909, 43 years earlier than the group's average year built (1952). Across all 24 jurisdictions BuildingCensus covers, the 1,327 other buildings average an ENERGY STAR score of 60 and a site EUI of 63.3 kBtu/ft².

How has F & O Inc's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for F & O Inc, covering report years 2015–2025. Site EUI moved from 20.2 kBtu/ft² (2015) to 15.9 kBtu/ft² (2025), a 21% decrease. Reported emissions went from 25 tCO₂e to 19 tCO₂e over the same span (down 22%).

What does a site EUI of 15.9 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. F & O Inc's 15.9 kBtu/ft² across 44,775 sq ft works out to about 0.7 billion Btu (209 MWh-equivalent) in 2025. Its source EUI of 31.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 110,668 kWh of electricity and 3,322 therms of natural gas for the year.

Which law requires F & O Inc to report its energy use?

F & O Inc reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:24710:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More other buildings in Seattle

Frequently asked questions

What is F & O Inc's energy grade?

F & O Inc did not report an ENERGY STAR score in its 2025 disclosure, but its site energy-use intensity was 15.9 kBtu/ft².

How much energy does F & O Inc use?

Its 2025 site energy-use intensity was 15.9 kBtu/ft² (31.4 kBtu/ft² source) across 44,775 sq ft, including 110,668 kWh of electricity and 3,322 therms of natural gas.

What are F & O Inc's carbon emissions?

F & O Inc reported 19 tCO₂e of greenhouse-gas emissions (0.4 kgCO₂e/ft²) for 2025.

Where is F & O Inc?

F & O Inc is at 1020 1ST AVE S, in Seattle, Washington 98134. Its coordinates are 47.59347, -122.33369 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is F & O Inc and when was it built?

F & O Inc has 44,775 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1909 as its year built. It is classed as other.

Is F & O Inc covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “F & O Inc, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/f-o-inc-42afc9b4 (data as of October 2, 2026).