BuildingCensus
C

Lowman And Hanford Building

Office in Seattle, WA · 616 1ST AVE · 98104

At a glance

Lowman And Hanford Building is a 23,622-square-foot office building at 616 1ST AVE in Seattle, Washington, built in 1900. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 68 out of 100 (grade C), a site energy-use intensity of 28.0 kBtu/ft² and 6 tCO₂e of greenhouse-gas emissions. That score is higher than 24% of the 378 scored office buildings in Seattle.

ENERGY STAR score
68
band C · 2025
Site EUI
28.0
kBtu/ft²
GHG emissions
6
tCO₂e
GHG intensity
0.2
kgCO₂e/ft²
Floor area
23,622
sq ft
Year built
1900
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score68 (band C)
Site EUI28.0 kBtu/ft²
Source EUI78.5 kBtu/ft²
GHG emissions6 tCO₂e
GHG intensity0.2 kgCO₂e/ft²
Electricity283,949 kWh
Gross floor area23,622 sq ft
Source recordseattle:19855:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest68-2528.0 kBtu/ft²6 tCO₂e
202493+2915.7 kBtu/ft²3 tCO₂e
202364+3029.9 kBtu/ft²6 tCO₂e
20223445.3 kBtu/ft²6 tCO₂e
2021———
20208038.9 kBtu/ft²6 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
616 1ST AVE
State
Washington
ZIP
98104
Coordinates
47.60247, -122.33372

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does Lowman And Hanford Building compare with other office buildings in Seattle?

The latest disclosures cover 497 office buildings in Seattle, out of 3,871 buildings citywide. Lowman And Hanford Building's ENERGY STAR score of 68 compares with an average of 76 across the 378 that report a score; it scores higher than 24% of them and lower than 74%. Its site EUI of 28.0 kBtu/ft² is about 38% below the average of 44.8 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.2 kgCO₂e/ft² is about 77% below the group average of 0.7 kgCO₂e/ft².

At 23,622 sq ft, it is about 88% below the average floor area of 196,452 sq ft for those buildings. It was built in 1900, 65 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has Lowman And Hanford Building's energy performance changed over time?

BuildingCensus holds 6 Seattle disclosures for Lowman And Hanford Building, covering report years 2020–2025. Its ENERGY STAR score went from 80 in 2020 to 68 in 2025 (-12 points); its best year on file was 2024, at 93. Site EUI moved from 38.9 kBtu/ft² (2020) to 28.0 kBtu/ft² (2025), a 28% decrease. Reported emissions went from 6 tCO₂e to 6 tCO₂e over the same span (down 3%).

What does an ENERGY STAR score of 68 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 68 means the building performs better than about 68% of its national peers. BuildingCensus bands the score into report-card grades; 68 falls in band C — below median (55–69). It sits 7 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Lowman And Hanford Building's 28.0 kBtu/ft² across 23,622 sq ft works out to about 0.7 billion Btu (194 MWh-equivalent) in 2025. Its source EUI of 78.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 283,949 kWh of electricity for the year.

Which law requires Lowman And Hanford Building to report its energy use?

Lowman And Hanford Building reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:19855:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More office buildings in Seattle

Frequently asked questions

What is Lowman And Hanford Building's energy grade?

Lowman And Hanford Building scores 68 out of 100 on ENERGY STAR — band C, below median (55–69) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Lowman And Hanford Building use?

Its 2025 site energy-use intensity was 28.0 kBtu/ft² (78.5 kBtu/ft² source) across 23,622 sq ft, including 283,949 kWh of electricity.

What are Lowman And Hanford Building's carbon emissions?

Lowman And Hanford Building reported 6 tCO₂e of greenhouse-gas emissions (0.2 kgCO₂e/ft²) for 2025.

Where is Lowman And Hanford Building?

Lowman And Hanford Building is at 616 1ST AVE, in Seattle, Washington 98104. Its coordinates are 47.60247, -122.33372 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Lowman And Hanford Building and when was it built?

Lowman And Hanford Building has 23,622 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1900 as its year built. It is classed as office.

Is Lowman And Hanford Building covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Lowman And Hanford Building, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/lowman-and-hanford-building-ab14891c (data as of October 2, 2026).