Northgate View #3

How does Northgate View #3 compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Northgate View #3's ENERGY STAR score of 86 compares with an average of 83 across the 1,652 that report a score; it scores higher than 39% of them and lower than 59%. Its site EUI of 23.8 kBtu/ft² is about 32% below the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.1 kgCO₂e/ft² is about 80% below the group average of 0.7 kgCO₂e/ft².

At 24,552 sq ft, it is about 72% below the average floor area of 86,468 sq ft for those buildings. It was built in 1979, 4 years earlier than the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Northgate View #3's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Northgate View #3, covering report years 2015–2025. Its ENERGY STAR score went from 59 in 2015 to 86 in 2025 (+27 points). Site EUI moved from 26.5 kBtu/ft² (2015) to 23.8 kBtu/ft² (2025), a 10% decrease. Reported emissions went from 4 tCO₂e to 3 tCO₂e over the same span (down 12%).

What does an ENERGY STAR score of 86 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 86 means the building performs better than about 86% of its national peers. BuildingCensus bands the score into report-card grades; 86 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Northgate View #3's 23.8 kBtu/ft² across 24,552 sq ft works out to about 0.6 billion Btu (171 MWh-equivalent) in 2025. Its source EUI of 66.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 171,052 kWh of electricity for the year.

Which law requires Northgate View #3 to report its energy use?

Northgate View #3 reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:23009:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.