BuildingCensus
D

Sandridge Apts

Multifamily Housing in Seattle, WA · 6200 SAND POINT WAY NE · 98115

At a glance

Sandridge Apts is a 40,894-square-foot multifamily housing building at 6200 SAND POINT WAY NE in Seattle, Washington, built in 1985. In its 2025 Seattle benchmarking disclosure it reported an ENERGY STAR score of 33 out of 100 (grade D), a site energy-use intensity of 34.0 kBtu/ft² and 6 tCO₂e of greenhouse-gas emissions. That score is higher than 4% of the 1,652 scored multifamily housing buildings in Seattle.

ENERGY STAR score
33
band D · 2025
Site EUI
34.0
kBtu/ft²
GHG emissions
6
tCO₂e
GHG intensity
0.2
kgCO₂e/ft²
Floor area
40,894
sq ft
Year built
1985
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Seattle Energy Benchmarking Ordinance (SMC 22.920) · reporting year 2025

Benchmarking record

FieldValue
ENERGY STAR score33 (band D)
Site EUI34.0 kBtu/ft²
Source EUI95.3 kBtu/ft²
GHG emissions6 tCO₂e
GHG intensity0.2 kgCO₂e/ft²
Electricity301,652 kWh
Gross floor area40,894 sq ft
Source recordseattle:26174:2025

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2025latest33+734.0 kBtu/ft²6 tCO₂e
202426-935.5 kBtu/ft²6 tCO₂e
202335+2033.7 kBtu/ft²6 tCO₂e
20221540.4 kBtu/ft²7 tCO₂e
2021———
202018+241.2 kBtu/ft²7 tCO₂e
201916-342.6 kBtu/ft²8 tCO₂e
201819±041.2 kBtu/ft²7 tCO₂e
201719+741.1 kBtu/ft²7 tCO₂e
201612+340.5 kBtu/ft²7 tCO₂e
2015942.1 kBtu/ft²7 tCO₂e

Compliance context

Seattle Energy Benchmarking Ordinance (SMC 22.920)

Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
6200 SAND POINT WAY NE
State
Washington
ZIP
98115
Coordinates
47.67385, -122.26521

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Seattle · biggest emitters

How does Sandridge Apts compare with other multifamily housing buildings in Seattle?

The latest disclosures cover 1,971 multifamily housing buildings in Seattle, out of 3,871 buildings citywide. Sandridge Apts's ENERGY STAR score of 33 compares with an average of 83 across the 1,652 that report a score; it scores higher than 4% of them and lower than 96%. Its site EUI of 34.0 kBtu/ft² is roughly in line with the average of 34.9 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 0.2 kgCO₂e/ft² is about 71% below the group average of 0.7 kgCO₂e/ft².

At 40,894 sq ft, it is about half of the average floor area of 86,468 sq ft for those buildings. Its 1985 construction date is close to the group's average year built (1983). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Sandridge Apts's energy performance changed over time?

BuildingCensus holds 11 Seattle disclosures for Sandridge Apts, covering report years 2015–2025. Its ENERGY STAR score went from 9 in 2015 to 33 in 2025 (+24 points); its best year on file was 2023, at 35. Site EUI moved from 42.1 kBtu/ft² (2015) to 34.0 kBtu/ft² (2025), a 19% decrease. Reported emissions went from 7 tCO₂e to 6 tCO₂e over the same span (down 20%).

What does an ENERGY STAR score of 33 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 33 means the building performs better than about 33% of its national peers. BuildingCensus bands the score into report-card grades; 33 falls in band D — lowest band (1–54). It sits 42 points below 75, the threshold for ENERGY STAR certification. In Seattle, 69% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Sandridge Apts's 34.0 kBtu/ft² across 40,894 sq ft works out to about 1.4 billion Btu (407 MWh-equivalent) in 2025. Its source EUI of 95.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 301,652 kWh of electricity for the year.

Which law requires Sandridge Apts to report its energy use?

Sandridge Apts reports under the Seattle Energy Benchmarking Ordinance (SMC 22.920), the legal basis of Seattle's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2025 disclosure (source record seattle:26174:2025). Seattle's Building Emissions Performance Standard (adopted 2023) applies to buildings over 20,000 sq ft: benchmarking verification is due 2027–2030 and initial emissions targets 2031–2035, reaching net zero by 2041–2050, with fines for non-compliance.

More multifamily housing buildings in Seattle

Frequently asked questions

What is Sandridge Apts's energy grade?

Sandridge Apts scores 33 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2025 Seattle disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Sandridge Apts use?

Its 2025 site energy-use intensity was 34.0 kBtu/ft² (95.3 kBtu/ft² source) across 40,894 sq ft, including 301,652 kWh of electricity.

What are Sandridge Apts's carbon emissions?

Sandridge Apts reported 6 tCO₂e of greenhouse-gas emissions (0.2 kgCO₂e/ft²) for 2025.

Where is Sandridge Apts?

Sandridge Apts is at 6200 SAND POINT WAY NE, in Seattle, Washington 98115. Its coordinates are 47.67385, -122.26521 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Sandridge Apts and when was it built?

Sandridge Apts has 40,894 sq ft of gross floor area, as reported in its 2025 disclosure. The disclosure lists 1985 as its year built. It is classed as multifamily housing.

Is Sandridge Apts covered by the Seattle Energy Benchmarking Ordinance (SMC 22.920)?

Yes — it appears in the 2025 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Seattle Energy Benchmarking Ordinance (SMC 22.920).

Working with Seattle building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Seattle Energy Benchmarking Ordinance (SMC 22.920)), as published October 2, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Sandridge Apts, Seattle, Washington — 2025 benchmarking disclosure”, https://buildingcensus.com/buildings/seattle/sandridge-apts-9cdd0f9a (data as of October 2, 2026).