BuildingCensus
D

111 K Street

Office in Washington, DC, DC · 111 K Street NE · 20002

At a glance

111 K Street is a 84,540-square-foot office building at 111 K Street NE in Washington, DC, built in 2011. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 38 out of 100 (grade D), a site energy-use intensity of 70.8 kBtu/ft² and 664 tCO₂e of greenhouse-gas emissions. That score is higher than 8% of the 774 scored office buildings in Washington, DC.

ENERGY STAR score
38
band D · 2017
Site EUI
70.8
kBtu/ft²
GHG emissions
664
tCO₂e
GHG intensity
7.8
kgCO₂e/ft²
Floor area
84,540
sq ft
Year built
2011
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2017

Benchmarking record

FieldValue
ENERGY STAR score38 (band D)
Site EUI70.8 kBtu/ft²
Source EUI222.2 kBtu/ft²
GHG emissions664 tCO₂e
GHG intensity7.8 kgCO₂e/ft²
Electricity1,753,068 kWh
Natural gas0 therms
Water use721 kgal
Gross floor area84,540 sq ft
Source recorddc:PM4576132:2017

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2017latest38+470.8 kBtu/ft²664 tCO₂e
201634-1976.1 kBtu/ft²737 tCO₂e
20155362.3 kBtu/ft²705 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

111 K STREET CONDO

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
111 K Street NE
State
District of Columbia
ZIP
20002
Coordinates
38.90224, -77.00560

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does 111 K Street compare with other office buildings in Washington, DC?

The latest disclosures cover 899 office buildings in Washington, DC, out of 6,870 buildings citywide. 111 K Street's ENERGY STAR score of 38 compares with an average of 70 across the 774 that report a score; it scores higher than 8% of them and lower than 91%. Its site EUI of 70.8 kBtu/ft² is about 27% above the average of 55.6 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 7.8 kgCO₂e/ft² is about 56% above the group average of 5.0 kgCO₂e/ft².

At 84,540 sq ft, it is about 61% below the average floor area of 216,135 sq ft for those buildings. It was built in 2011, 37 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has 111 K Street's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for 111 K Street, covering report years 2015–2017. Its ENERGY STAR score went from 53 in 2015 to 38 in 2017 (-15 points); its best year on file was 2015, at 53. Site EUI moved from 62.3 kBtu/ft² (2015) to 70.8 kBtu/ft² (2017), an 14% increase. Reported emissions went from 705 tCO₂e to 664 tCO₂e over the same span (down 6%).

What does an ENERGY STAR score of 38 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 38 means the building performs better than about 38% of its national peers. BuildingCensus bands the score into report-card grades; 38 falls in band D — lowest band (1–54). It sits 37 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 111 K Street's 70.8 kBtu/ft² across 84,540 sq ft works out to about 6 billion Btu (1,754 MWh-equivalent) in 2017. Its source EUI of 222.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,753,068 kWh of electricity, 0 therms of natural gas and 721 thousand gallons of water for the year.

Which law requires 111 K Street to report its energy use?

111 K Street reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM4576132:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More office buildings in Washington, DC

Frequently asked questions

What is 111 K Street's energy grade?

111 K Street scores 38 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 111 K Street use?

Its 2017 site energy-use intensity was 70.8 kBtu/ft² (222.2 kBtu/ft² source) across 84,540 sq ft, including 1,753,068 kWh of electricity and 0 therms of natural gas.

What are 111 K Street's carbon emissions?

111 K Street reported 664 tCO₂e of greenhouse-gas emissions (7.8 kgCO₂e/ft²) for 2017.

Where is 111 K Street?

111 K Street is at 111 K Street NE, in Washington, DC 20002. Its coordinates are 38.90224, -77.00560 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is 111 K Street and when was it built?

111 K Street has 84,540 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 2011 as its year built. It is classed as office.

Is 111 K Street covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “111 K Street, Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/111-k-street-1e98b444 (data as of July 9, 2026).