1820 Clydesdale Place Coop

How does 1820 Clydesdale Place Coop compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. 1820 Clydesdale Place Coop's ENERGY STAR score of 91 compares with an average of 72 across the 1,618 that report a score; it scores higher than 72% of them and lower than 26%. Its site EUI of 57.4 kBtu/ft² is about 12% above the average of 51.1 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 3.4 kgCO₂e/ft² is about 10% below the group average of 3.8 kgCO₂e/ft².

At 55,350 sq ft, it is about 59% below the average floor area of 136,346 sq ft for those buildings. It was built in 1927, 38 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has 1820 Clydesdale Place Coop's energy performance changed over time?

BuildingCensus holds 7 Washington, DC disclosures for 1820 Clydesdale Place Coop, covering report years 2018–2024. Its ENERGY STAR score went from 82 in 2018 to 91 in 2024 (+9 points). Site EUI moved from 69.5 kBtu/ft² (2018) to 57.4 kBtu/ft² (2024), a 17% decrease. Reported emissions went from 233 tCO₂e to 189 tCO₂e over the same span (down 19%).

What does an ENERGY STAR score of 91 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 91 means the building performs better than about 91% of its national peers. BuildingCensus bands the score into report-card grades; 91 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 1820 Clydesdale Place Coop's 57.4 kBtu/ft² across 55,350 sq ft works out to about 3.2 billion Btu (931 MWh-equivalent) in 2024. Its source EUI of 79.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 175,444 kWh of electricity, 25,772 therms of natural gas and 1,252 thousand gallons of water for the year.

Which law requires 1820 Clydesdale Place Coop to report its energy use?

1820 Clydesdale Place Coop reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM10523583:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.