BuildingCensus
D

2235 Shannon Place

Office in Washington, DC, DC · 2235 Shannon Place, SE · 20020

At a glance

2235 Shannon Place is a 82,184-square-foot office building at 2235 Shannon Place, SE in Washington, DC, built in 1962. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 28 out of 100 (grade D), a site energy-use intensity of 70.0 kBtu/ft² and 458 tCO₂e of greenhouse-gas emissions. That score is higher than 6% of the 774 scored office buildings in Washington, DC.

ENERGY STAR score
28
band D · 2024
Site EUI
70.0
kBtu/ft²
GHG emissions
458
tCO₂e
GHG intensity
5.6
kgCO₂e/ft²
Floor area
82,184
sq ft
Year built
1962
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score28 (band D)
Site EUI70.0 kBtu/ft²
Source EUI195.9 kBtu/ft²
GHG emissions458 tCO₂e
GHG intensity5.6 kgCO₂e/ft²
Electricity1,685,347 kWh
Natural gas0 therms
Water use30 kgal
Gross floor area82,184 sq ft
Source recorddc:PM35042612:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest28-970.0 kBtu/ft²458 tCO₂e
20233761.3 kBtu/ft²442 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

No owning organisation shown. Names of private individuals in the disclosure are not published here.

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2235 Shannon Place, SE
State
District of Columbia
ZIP
20020
Coordinates
38.86463, -76.99135

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does 2235 Shannon Place compare with other office buildings in Washington, DC?

The latest disclosures cover 899 office buildings in Washington, DC, out of 6,870 buildings citywide. 2235 Shannon Place's ENERGY STAR score of 28 compares with an average of 70 across the 774 that report a score; it scores higher than 6% of them and lower than 94%. Its site EUI of 70.0 kBtu/ft² is about 26% above the average of 55.6 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 5.6 kgCO₂e/ft² is about 11% above the group average of 5.0 kgCO₂e/ft².

At 82,184 sq ft, it is about 62% below the average floor area of 216,135 sq ft for those buildings. It was built in 1962, 12 years earlier than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has 2235 Shannon Place's energy performance changed over time?

BuildingCensus holds 2 Washington, DC disclosures for 2235 Shannon Place, covering report years 2023–2024. Its ENERGY STAR score went from 37 in 2023 to 28 in 2024 (-9 points); its best year on file was 2023, at 37. Site EUI moved from 61.3 kBtu/ft² (2023) to 70.0 kBtu/ft² (2024), an 14% increase. Reported emissions went from 442 tCO₂e to 458 tCO₂e over the same span (up 4%).

What does an ENERGY STAR score of 28 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 28 means the building performs better than about 28% of its national peers. BuildingCensus bands the score into report-card grades; 28 falls in band D — lowest band (1–54). It sits 47 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 2235 Shannon Place's 70.0 kBtu/ft² across 82,184 sq ft works out to about 5.8 billion Btu (1,686 MWh-equivalent) in 2024. Its source EUI of 195.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,685,347 kWh of electricity, 0 therms of natural gas and 30 thousand gallons of water for the year.

Which law requires 2235 Shannon Place to report its energy use?

2235 Shannon Place reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM35042612:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More office buildings in Washington, DC

Frequently asked questions

What is 2235 Shannon Place's energy grade?

2235 Shannon Place scores 28 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 2235 Shannon Place use?

Its 2024 site energy-use intensity was 70.0 kBtu/ft² (195.9 kBtu/ft² source) across 82,184 sq ft, including 1,685,347 kWh of electricity and 0 therms of natural gas.

What are 2235 Shannon Place's carbon emissions?

2235 Shannon Place reported 458 tCO₂e of greenhouse-gas emissions (5.6 kgCO₂e/ft²) for 2024.

Where is 2235 Shannon Place?

2235 Shannon Place is at 2235 Shannon Place, SE, in Washington, DC 20020. Its coordinates are 38.86463, -76.99135 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is 2235 Shannon Place and when was it built?

2235 Shannon Place has 82,184 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1962 as its year built. It is classed as office.

Is 2235 Shannon Place covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “2235 Shannon Place, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/2235-shannon-place-b6ae1c8e (data as of July 9, 2026).