BuildingCensus
D

42SUL-W Washington, D.C.

Hotel in Washington, DC, DC · 515 15th Street NW · 20004

At a glance

42SUL-W Washington, D.C. is a 225,000-square-foot hotel at 515 15th Street NW in Washington, DC, built in 1919. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 42 out of 100 (grade D), a site energy-use intensity of 118.9 kBtu/ft² and 3,011 tCO₂e of greenhouse-gas emissions. That score is higher than 25% of the 251 scored hotel buildings in Washington, DC.

ENERGY STAR score
42
band D · 2017
Site EUI
118.9
kBtu/ft²
GHG emissions
3,011
tCO₂e
GHG intensity
13.4
kgCO₂e/ft²
Floor area
225,000
sq ft
Year built
1919
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2017

Benchmarking record

FieldValue
ENERGY STAR score42 (band D)
Site EUI118.9 kBtu/ft²
Source EUI272.8 kBtu/ft²
GHG emissions3,011 tCO₂e
GHG intensity13.4 kgCO₂e/ft²
Electricity4,667,660 kWh
Natural gas108,252 therms
Water use15,241 kgal
Gross floor area225,000 sq ft
Source recorddc:PM6277982:2017

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

ISTITHMAR HOTELS WASHINGTON LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
515 15th Street NW
State
District of Columbia
ZIP
20004
Coordinates
38.89716, -77.03309

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does 42SUL-W Washington, D.C. compare with other hotel buildings in Washington, DC?

The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. 42SUL-W Washington, D.C.'s ENERGY STAR score of 42 compares with an average of 58 across the 251 that report a score; it scores higher than 25% of them and lower than 72%. Its site EUI of 118.9 kBtu/ft² is about 36% above the average of 87.6 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 13.4 kgCO₂e/ft² is about twice the group average of 6.9 kgCO₂e/ft².

At 225,000 sq ft, it is roughly in line with the average floor area of 227,860 sq ft for those buildings. It was built in 1919, 55 years earlier than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².

What does an ENERGY STAR score of 42 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 42 means the building performs better than about 42% of its national peers. BuildingCensus bands the score into report-card grades; 42 falls in band D — lowest band (1–54). It sits 33 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. 42SUL-W Washington, D.C.'s 118.9 kBtu/ft² across 225,000 sq ft works out to about 26.8 billion Btu (7,840 MWh-equivalent) in 2017. Its source EUI of 272.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 4,667,660 kWh of electricity, 108,252 therms of natural gas and 15,241 thousand gallons of water for the year.

Which law requires 42SUL-W Washington, D.C. to report its energy use?

42SUL-W Washington, D.C. reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM6277982:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More hotel buildings in Washington, DC

Frequently asked questions

What is 42SUL-W Washington, D.C.'s energy grade?

42SUL-W Washington, D.C. scores 42 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does 42SUL-W Washington, D.C. use?

Its 2017 site energy-use intensity was 118.9 kBtu/ft² (272.8 kBtu/ft² source) across 225,000 sq ft, including 4,667,660 kWh of electricity and 108,252 therms of natural gas.

What are 42SUL-W Washington, D.C.'s carbon emissions?

42SUL-W Washington, D.C. reported 3,011 tCO₂e of greenhouse-gas emissions (13.4 kgCO₂e/ft²) for 2017.

Where is 42SUL-W Washington, D.C.?

42SUL-W Washington, D.C. is at 515 15th Street NW, in Washington, DC 20004. Its coordinates are 38.89716, -77.03309 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is 42SUL-W Washington, D.C. and when was it built?

42SUL-W Washington, D.C. has 225,000 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 1919 as its year built. It is classed as hotel.

Is 42SUL-W Washington, D.C. covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “42SUL-W Washington, D.C., Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/42sul-w-washington-d-c-a82f4cca (data as of July 9, 2026).