BuildingCensus
D

AKA White House

Multifamily Housing in Washington, DC, DC · 1710 H Street Northwest · 20006

At a glance

AKA White House is a 165,094-square-foot multifamily housing building at 1710 H Street Northwest in Washington, DC, built in 2006. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 22 out of 100 (grade D), a site energy-use intensity of 51.6 kBtu/ft² and 736 tCO₂e of greenhouse-gas emissions. That score is higher than 5% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
22
band D · 2024
Site EUI
51.6
kBtu/ft²
GHG emissions
736
tCO₂e
GHG intensity
4.5
kgCO₂e/ft²
Floor area
165,094
sq ft
Year built
2006
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score22 (band D)
Site EUI51.6 kBtu/ft²
Source EUI140.9 kBtu/ft²
GHG emissions736 tCO₂e
GHG intensity4.5 kgCO₂e/ft²
Electricity2,397,490 kWh
Natural gas3,461 therms
Water use6,430 kgal
Gross floor area165,094 sq ft
Source recorddc:PM4392914:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest22+551.6 kBtu/ft²736 tCO₂e
202317-251.4 kBtu/ft²750 tCO₂e
202219+354.3 kBtu/ft²768 tCO₂e
202116-654.7 kBtu/ft²826 tCO₂e
202022+750.3 kBtu/ft²762 tCO₂e
201915+156.3 kBtu/ft²883 tCO₂e
201814+158.0 kBtu/ft²912 tCO₂e
201713-1152.3 kBtu/ft²952 tCO₂e
201624±051.3 kBtu/ft²944 tCO₂e
20152451.6 kBtu/ft²1,098 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

WASHINGTON H STREET ASSOCIATES LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1710 H Street Northwest
State
District of Columbia
ZIP
20006
Coordinates
38.89993, -77.04036

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does AKA White House compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. AKA White House's ENERGY STAR score of 22 compares with an average of 72 across the 1,618 that report a score; it scores higher than 5% of them and lower than 94%. Its site EUI of 51.6 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft². Its emissions intensity of 4.5 kgCO₂e/ft² is about 17% above the group average of 3.8 kgCO₂e/ft².

At 165,094 sq ft, it is about 21% above the average floor area of 136,346 sq ft for those buildings. It was built in 2006, 41 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has AKA White House's energy performance changed over time?

BuildingCensus holds 10 Washington, DC disclosures for AKA White House, covering report years 2015–2024. Its ENERGY STAR score went from 24 in 2015 to 22 in 2024 (-2 points); its best year on file was 2015, at 24. Site EUI moved from 51.6 kBtu/ft² (2015) to 51.6 kBtu/ft² (2024), an 0% increase. Reported emissions went from 1,098 tCO₂e to 736 tCO₂e over the same span (down 33%).

What does an ENERGY STAR score of 22 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 22 means the building performs better than about 22% of its national peers. BuildingCensus bands the score into report-card grades; 22 falls in band D — lowest band (1–54). It sits 53 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. AKA White House's 51.6 kBtu/ft² across 165,094 sq ft works out to about 8.5 billion Btu (2,497 MWh-equivalent) in 2024. Its source EUI of 140.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 2,397,490 kWh of electricity, 3,461 therms of natural gas and 6,430 thousand gallons of water for the year.

Which law requires AKA White House to report its energy use?

AKA White House reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM4392914:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is AKA White House's energy grade?

AKA White House scores 22 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does AKA White House use?

Its 2024 site energy-use intensity was 51.6 kBtu/ft² (140.9 kBtu/ft² source) across 165,094 sq ft, including 2,397,490 kWh of electricity and 3,461 therms of natural gas.

What are AKA White House's carbon emissions?

AKA White House reported 736 tCO₂e of greenhouse-gas emissions (4.5 kgCO₂e/ft²) for 2024.

Where is AKA White House?

AKA White House is at 1710 H Street Northwest, in Washington, DC 20006. Its coordinates are 38.89993, -77.04036 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is AKA White House and when was it built?

AKA White House has 165,094 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2006 as its year built. It is classed as multifamily housing.

Is AKA White House covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “AKA White House, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/aka-white-house-ee1d86c6 (data as of July 9, 2026).