BuildingCensus
A

American Geophysical Union

Office in Washington, DC, DC · 2000 Florida Ave NW · 20009

At a glance

American Geophysical Union is a 72,898-square-foot office building at 2000 Florida Ave NW in Washington, DC, built in 1994. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 95 out of 100 (grade A), a site energy-use intensity of 30.3 kBtu/ft² and 85 tCO₂e of greenhouse-gas emissions. That score is higher than 96% of the 774 scored office buildings in Washington, DC.

ENERGY STAR score
95
band A · 2024
Site EUI
30.3
kBtu/ft²
GHG emissions
85
tCO₂e
GHG intensity
1.2
kgCO₂e/ft²
Floor area
72,898
sq ft
Year built
1994
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score95 (band A)
Site EUI30.3 kBtu/ft²
Source EUI56.6 kBtu/ft²
GHG emissions85 tCO₂e
GHG intensity1.2 kgCO₂e/ft²
Electricity312,429 kWh
Natural gas0 therms
Water use38 kgal
Gross floor area72,898 sq ft
Source recorddc:PM6279989:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest95+530.3 kBtu/ft²85 tCO₂e
202390-434.7 kBtu/ft²128 tCO₂e
202294±033.2 kBtu/ft²115 tCO₂e
202194+127.0 kBtu/ft²137 tCO₂e
202093+925.2 kBtu/ft²179 tCO₂e
201984-1131.8 kBtu/ft²223 tCO₂e
20179533.3 kBtu/ft²231 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

AMERICAN GEOPHYSICAL UNION

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2000 Florida Ave NW
State
District of Columbia
ZIP
20009
Coordinates
38.91465, -77.04520

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does American Geophysical Union compare with other office buildings in Washington, DC?

The latest disclosures cover 899 office buildings in Washington, DC, out of 6,870 buildings citywide. American Geophysical Union's ENERGY STAR score of 95 compares with an average of 70 across the 774 that report a score; it scores higher than 96% of them and lower than 3%. Its site EUI of 30.3 kBtu/ft² is about half of the average of 55.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 1.2 kgCO₂e/ft² is about 77% below the group average of 5.0 kgCO₂e/ft².

At 72,898 sq ft, it is about 66% below the average floor area of 216,135 sq ft for those buildings. It was built in 1994, 20 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has American Geophysical Union's energy performance changed over time?

BuildingCensus holds 7 Washington, DC disclosures for American Geophysical Union, covering report years 2017, 2019, 2020, 2021, 2022, 2023, 2024. Its ENERGY STAR score was 95 in both 2017 and 2024. Site EUI moved from 33.3 kBtu/ft² (2017) to 30.3 kBtu/ft² (2024), a 9% decrease. Reported emissions went from 231 tCO₂e to 85 tCO₂e over the same span (down 63%).

What does an ENERGY STAR score of 95 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 95 means the building performs better than about 95% of its national peers. BuildingCensus bands the score into report-card grades; 95 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. American Geophysical Union's 30.3 kBtu/ft² across 72,898 sq ft works out to about 2.2 billion Btu (647 MWh-equivalent) in 2024. Its source EUI of 56.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 312,429 kWh of electricity, 0 therms of natural gas and 38 thousand gallons of water for the year.

Which law requires American Geophysical Union to report its energy use?

American Geophysical Union reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM6279989:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More office buildings in Washington, DC

Frequently asked questions

What is American Geophysical Union's energy grade?

American Geophysical Union scores 95 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does American Geophysical Union use?

Its 2024 site energy-use intensity was 30.3 kBtu/ft² (56.6 kBtu/ft² source) across 72,898 sq ft, including 312,429 kWh of electricity and 0 therms of natural gas.

What are American Geophysical Union's carbon emissions?

American Geophysical Union reported 85 tCO₂e of greenhouse-gas emissions (1.2 kgCO₂e/ft²) for 2024.

Where is American Geophysical Union?

American Geophysical Union is at 2000 Florida Ave NW, in Washington, DC 20009. Its coordinates are 38.91465, -77.04520 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is American Geophysical Union and when was it built?

American Geophysical Union has 72,898 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1994 as its year built. It is classed as office.

Is American Geophysical Union covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “American Geophysical Union, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/american-geophysical-union-b119bb00 (data as of July 9, 2026).