BuildingCensus
–

Architecture and Planning (1A)

College/University in Washington, DC, DC · 2366 6th St. NW · 20059

At a glance

Architecture and Planning (1A) is a 63,367-square-foot college/university building at 2366 6th St. NW in Washington, DC, built in 1956.

ENERGY STAR score
—
not reported · 2017
Site EUI
—
kBtu/ft²
GHG emissions
—
tCO₂e
GHG intensity
—
kgCO₂e/ft²
Floor area
63,367
sq ft
Year built
1956
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2017

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI—
Source EUI—
GHG emissions—
GHG intensity—
Electricity0 kWh
Natural gas0 therms
Water use1,734 kgal
Gross floor area63,367 sq ft
Source recorddc:PM4060679:2017

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2017latest———
2016———
2015———
2014———
2013———
2012———

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

HOWARD UNIVERSITY (LAND ONLY)

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2366 6th St. NW
State
District of Columbia
ZIP
20059
Coordinates
38.92210, -77.02150

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Architecture and Planning (1A) compare with other college/university buildings in Washington, DC?

The latest disclosures cover 114 college/university buildings in Washington, DC, out of 6,870 buildings citywide.

At 63,367 sq ft, it is about 82% below the average floor area of 350,614 sq ft for those buildings. It was built in 1956, 7 years earlier than the group's average year built (1963). Across all 24 jurisdictions BuildingCensus covers, the 2,113 college/university buildings average an ENERGY STAR score of 68 and a site EUI of 98.7 kBtu/ft².

How has Architecture and Planning (1A)'s energy performance changed over time?

BuildingCensus holds 6 Washington, DC disclosures for Architecture and Planning (1A), covering report years 2012–2017. None of those years carry an ENERGY STAR score or site EUI.

Which law requires Architecture and Planning (1A) to report its energy use?

Architecture and Planning (1A) reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM4060679:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More college/university buildings in Washington, DC

Frequently asked questions

What is Architecture and Planning (1A)'s energy grade?

Architecture and Planning (1A) did not report an ENERGY STAR score in its 2017 disclosure.

How much energy does Architecture and Planning (1A) use?

No energy-use intensity was reported for 2017.

What are Architecture and Planning (1A)'s carbon emissions?

No greenhouse-gas emissions figure was reported for 2017.

Where is Architecture and Planning (1A)?

Architecture and Planning (1A) is at 2366 6th St. NW, in Washington, DC 20059. Its coordinates are 38.92210, -77.02150 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Architecture and Planning (1A) and when was it built?

Architecture and Planning (1A) has 63,367 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 1956 as its year built. It is classed as college/university.

Is Architecture and Planning (1A) covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Architecture and Planning (1A), Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/architecture-and-planning-1a-59225534 (data as of July 9, 2026).