BuildingCensus
D

Artisan Condominium

Multifamily Housing in Washington, DC, DC · 915 E St NW · 20004

At a glance

Artisan Condominium is a 180,783-square-foot multifamily housing building at 915 E St NW in Washington, DC, built in 2006. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 40 out of 100 (grade D), a site energy-use intensity of 54.3 kBtu/ft² and 738 tCO₂e of greenhouse-gas emissions. That score is higher than 12% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
40
band D · 2024
Site EUI
54.3
kBtu/ft²
GHG emissions
738
tCO₂e
GHG intensity
4.1
kgCO₂e/ft²
Floor area
180,783
sq ft
Year built
2006
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score40 (band D)
Site EUI54.3 kBtu/ft²
Source EUI117.6 kBtu/ft²
GHG emissions738 tCO₂e
GHG intensity4.1 kgCO₂e/ft²
Electricity1,833,996 kWh
Natural gas35,637 therms
Water use5,451 kgal
Gross floor area180,783 sq ft
Source recorddc:PM4373068:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest40+854.3 kBtu/ft²738 tCO₂e
202332-1554.7 kBtu/ft²742 tCO₂e
202247+1453.3 kBtu/ft²727 tCO₂e
202133-1255.3 kBtu/ft²781 tCO₂e
202045+651.1 kBtu/ft²697 tCO₂e
201939+659.0 kBtu/ft²820 tCO₂e
201833-2361.5 kBtu/ft²881 tCO₂e
201756+761.9 kBtu/ft²612 tCO₂e
201649+667.8 kBtu/ft²666 tCO₂e
201543-4469.9 kBtu/ft²756 tCO₂e
201487±038.3 kBtu/ft²778 tCO₂e
20138737.7 kBtu/ft²767 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

THE ARTISAN CONDO

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
915 E St NW
State
District of Columbia
ZIP
20004
Coordinates
38.89636, -77.02506

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Artisan Condominium compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Artisan Condominium's ENERGY STAR score of 40 compares with an average of 72 across the 1,618 that report a score; it scores higher than 12% of them and lower than 87%. Its site EUI of 54.3 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft². Its emissions intensity of 4.1 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 180,783 sq ft, it is about 33% above the average floor area of 136,346 sq ft for those buildings. It was built in 2006, 41 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Artisan Condominium's energy performance changed over time?

BuildingCensus holds 12 Washington, DC disclosures for Artisan Condominium, covering report years 2013–2024. Its ENERGY STAR score went from 87 in 2013 to 40 in 2024 (-47 points); its best year on file was 2013, at 87. Site EUI moved from 37.7 kBtu/ft² (2013) to 54.3 kBtu/ft² (2024), an 44% increase. Reported emissions went from 767 tCO₂e to 738 tCO₂e over the same span (down 4%).

What does an ENERGY STAR score of 40 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 40 means the building performs better than about 40% of its national peers. BuildingCensus bands the score into report-card grades; 40 falls in band D — lowest band (1–54). It sits 35 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Artisan Condominium's 54.3 kBtu/ft² across 180,783 sq ft works out to about 9.8 billion Btu (2,877 MWh-equivalent) in 2024. Its source EUI of 117.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,833,996 kWh of electricity, 35,637 therms of natural gas and 5,451 thousand gallons of water for the year.

Which law requires Artisan Condominium to report its energy use?

Artisan Condominium reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM4373068:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Artisan Condominium's energy grade?

Artisan Condominium scores 40 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Artisan Condominium use?

Its 2024 site energy-use intensity was 54.3 kBtu/ft² (117.6 kBtu/ft² source) across 180,783 sq ft, including 1,833,996 kWh of electricity and 35,637 therms of natural gas.

What are Artisan Condominium's carbon emissions?

Artisan Condominium reported 738 tCO₂e of greenhouse-gas emissions (4.1 kgCO₂e/ft²) for 2024.

Where is Artisan Condominium?

Artisan Condominium is at 915 E St NW, in Washington, DC 20004. Its coordinates are 38.89636, -77.02506 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Artisan Condominium and when was it built?

Artisan Condominium has 180,783 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2006 as its year built. It is classed as multifamily housing.

Is Artisan Condominium covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Artisan Condominium, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/artisan-condominium-f3e93d4a (data as of July 9, 2026).