BuildingCensus
A

Carpenter's Building: 1003 K Street NW

Office in Washington, DC, DC · 1003 K Street Northwest · 20001

At a glance

Carpenter's Building: 1003 K Street NW is a 42,590-square-foot office building at 1003 K Street Northwest in Washington, DC, built in 1926. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 93 out of 100 (grade A), a site energy-use intensity of 36.2 kBtu/ft² and 105 tCO₂e of greenhouse-gas emissions. That score is higher than 94% of the 774 scored office buildings in Washington, DC.

ENERGY STAR score
93
band A · 2024
Site EUI
36.2
kBtu/ft²
GHG emissions
105
tCO₂e
GHG intensity
2.5
kgCO₂e/ft²
Floor area
42,590
sq ft
Year built
1926
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score93 (band A)
Site EUI36.2 kBtu/ft²
Source EUI65.4 kBtu/ft²
GHG emissions105 tCO₂e
GHG intensity2.5 kgCO₂e/ft²
Electricity195,360 kWh
Natural gas8,758 therms
Water use323 kgal
Gross floor area42,590 sq ft
Source recorddc:PM19912649:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest93+136.2 kBtu/ft²105 tCO₂e
202392+432.4 kBtu/ft²104 tCO₂e
20228838.6 kBtu/ft²119 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

1001 K STREET ASSOCIATES LTD

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1003 K Street Northwest
State
District of Columbia
ZIP
20001
Coordinates
38.90275, -77.02616

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Carpenter's Building: 1003 K Street NW compare with other office buildings in Washington, DC?

The latest disclosures cover 899 office buildings in Washington, DC, out of 6,870 buildings citywide. Carpenter's Building: 1003 K Street NW's ENERGY STAR score of 93 compares with an average of 70 across the 774 that report a score; it scores higher than 94% of them and lower than 5%. Its site EUI of 36.2 kBtu/ft² is about 35% below the average of 55.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.5 kgCO₂e/ft² is about half of the group average of 5.0 kgCO₂e/ft².

At 42,590 sq ft, it is about 80% below the average floor area of 216,135 sq ft for those buildings. It was built in 1926, 48 years earlier than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 15,264 office buildings average an ENERGY STAR score of 73 and a site EUI of 59.3 kBtu/ft².

How has Carpenter's Building: 1003 K Street NW's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Carpenter's Building: 1003 K Street NW, covering report years 2022–2024. Its ENERGY STAR score went from 88 in 2022 to 93 in 2024 (+5 points). Site EUI moved from 38.6 kBtu/ft² (2022) to 36.2 kBtu/ft² (2024), a 6% decrease. Reported emissions went from 119 tCO₂e to 105 tCO₂e over the same span (down 12%).

What does an ENERGY STAR score of 93 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 93 means the building performs better than about 93% of its national peers. BuildingCensus bands the score into report-card grades; 93 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Carpenter's Building: 1003 K Street NW's 36.2 kBtu/ft² across 42,590 sq ft works out to about 1.5 billion Btu (452 MWh-equivalent) in 2024. Its source EUI of 65.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 195,360 kWh of electricity, 8,758 therms of natural gas and 323 thousand gallons of water for the year.

Which law requires Carpenter's Building: 1003 K Street NW to report its energy use?

Carpenter's Building: 1003 K Street NW reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM19912649:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More office buildings in Washington, DC

Frequently asked questions

What is Carpenter's Building: 1003 K Street NW's energy grade?

Carpenter's Building: 1003 K Street NW scores 93 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Carpenter's Building: 1003 K Street NW use?

Its 2024 site energy-use intensity was 36.2 kBtu/ft² (65.4 kBtu/ft² source) across 42,590 sq ft, including 195,360 kWh of electricity and 8,758 therms of natural gas.

What are Carpenter's Building: 1003 K Street NW's carbon emissions?

Carpenter's Building: 1003 K Street NW reported 105 tCO₂e of greenhouse-gas emissions (2.5 kgCO₂e/ft²) for 2024.

Where is Carpenter's Building: 1003 K Street NW?

Carpenter's Building: 1003 K Street NW is at 1003 K Street Northwest, in Washington, DC 20001. Its coordinates are 38.90275, -77.02616 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Carpenter's Building: 1003 K Street NW and when was it built?

Carpenter's Building: 1003 K Street NW has 42,590 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1926 as its year built. It is classed as office.

Is Carpenter's Building: 1003 K Street NW covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Carpenter's Building: 1003 K Street NW, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/carpenter-s-building-1003-k-street-nw-8a579b18 (data as of July 9, 2026).