BuildingCensus
D

Cedar Crossing Condominiums - Whole Bldg

Multifamily Housing in Washington, DC, DC · 343 Cedar Street NW

At a glance

Cedar Crossing Condominiums - Whole Bldg is a 56,610-square-foot multifamily housing building at 343 Cedar Street NW in Washington, DC, built in 2005. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 46 out of 100 (grade D), a site energy-use intensity of 38.1 kBtu/ft² and 239 tCO₂e of greenhouse-gas emissions. That score is higher than 16% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
46
band D · 2017
Site EUI
38.1
kBtu/ft²
GHG emissions
239
tCO₂e
GHG intensity
4.2
kgCO₂e/ft²
Floor area
56,610
sq ft
Year built
2005
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2017

Benchmarking record

FieldValue
ENERGY STAR score46 (band D)
Site EUI38.1 kBtu/ft²
Source EUI119.5 kBtu/ft²
GHG emissions239 tCO₂e
GHG intensity4.2 kgCO₂e/ft²
Electricity631,389 kWh
Natural gas0 therms
Water use1,583 kgal
Gross floor area56,610 sq ft
Source recorddc:PM3999668:2017

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2017latest46-238.1 kBtu/ft²239 tCO₂e
201648+4039.5 kBtu/ft²256 tCO₂e
2015854.6 kBtu/ft²414 tCO₂e
2013—45.6 kBtu/ft²327 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

CEDAR CROSSING CONDOMINIUM

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
343 Cedar Street NW
State
District of Columbia
Coordinates
38.97497, -77.01808

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Cedar Crossing Condominiums - Whole Bldg compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Cedar Crossing Condominiums - Whole Bldg's ENERGY STAR score of 46 compares with an average of 72 across the 1,618 that report a score; it scores higher than 16% of them and lower than 83%. Its site EUI of 38.1 kBtu/ft² is about 25% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.2 kgCO₂e/ft² is about 11% above the group average of 3.8 kgCO₂e/ft².

At 56,610 sq ft, it is about 58% below the average floor area of 136,346 sq ft for those buildings. It was built in 2005, 40 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Cedar Crossing Condominiums - Whole Bldg's energy performance changed over time?

BuildingCensus holds 4 Washington, DC disclosures for Cedar Crossing Condominiums - Whole Bldg, covering report years 2013, 2015, 2016, 2017. Its ENERGY STAR score went from 8 in 2015 to 46 in 2017 (+38 points); its best year on file was 2016, at 48. Site EUI moved from 45.6 kBtu/ft² (2013) to 38.1 kBtu/ft² (2017), a 16% decrease. Reported emissions went from 327 tCO₂e to 239 tCO₂e over the same span (down 27%).

What does an ENERGY STAR score of 46 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 46 means the building performs better than about 46% of its national peers. BuildingCensus bands the score into report-card grades; 46 falls in band D — lowest band (1–54). It sits 29 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Cedar Crossing Condominiums - Whole Bldg's 38.1 kBtu/ft² across 56,610 sq ft works out to about 2.2 billion Btu (632 MWh-equivalent) in 2017. Its source EUI of 119.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 631,389 kWh of electricity, 0 therms of natural gas and 1,583 thousand gallons of water for the year.

Which law requires Cedar Crossing Condominiums - Whole Bldg to report its energy use?

Cedar Crossing Condominiums - Whole Bldg reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM3999668:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Cedar Crossing Condominiums - Whole Bldg's energy grade?

Cedar Crossing Condominiums - Whole Bldg scores 46 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Cedar Crossing Condominiums - Whole Bldg use?

Its 2017 site energy-use intensity was 38.1 kBtu/ft² (119.5 kBtu/ft² source) across 56,610 sq ft, including 631,389 kWh of electricity and 0 therms of natural gas.

What are Cedar Crossing Condominiums - Whole Bldg's carbon emissions?

Cedar Crossing Condominiums - Whole Bldg reported 239 tCO₂e of greenhouse-gas emissions (4.2 kgCO₂e/ft²) for 2017.

Where is Cedar Crossing Condominiums - Whole Bldg?

Cedar Crossing Condominiums - Whole Bldg is at 343 Cedar Street NW, in Washington, DC. Its coordinates are 38.97497, -77.01808 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Cedar Crossing Condominiums - Whole Bldg and when was it built?

Cedar Crossing Condominiums - Whole Bldg has 56,610 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 2005 as its year built. It is classed as multifamily housing.

Is Cedar Crossing Condominiums - Whole Bldg covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Cedar Crossing Condominiums - Whole Bldg, Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/cedar-crossing-condominiums-whole-bldg-419ba341 (data as of July 9, 2026).