Cityscape on Belmont

How does Cityscape on Belmont compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Cityscape on Belmont's ENERGY STAR score of 98 compares with an average of 72 across the 1,618 that report a score; it scores higher than 90% of them and lower than 8%. Its site EUI of 30.9 kBtu/ft² is about 40% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.4 kgCO₂e/ft² is about 36% below the group average of 3.8 kgCO₂e/ft².

At 34,033 sq ft, it is about 75% below the average floor area of 136,346 sq ft for those buildings. It was built in 2008, 43 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Cityscape on Belmont's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Cityscape on Belmont, covering report years 2022–2024. Its ENERGY STAR score was 98 in both 2022 and 2024. Site EUI moved from 31.6 kBtu/ft² (2022) to 30.9 kBtu/ft² (2024), a 2% decrease. Reported emissions went from 86 tCO₂e to 83 tCO₂e over the same span (down 4%).

What does an ENERGY STAR score of 98 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 98 means the building performs better than about 98% of its national peers. BuildingCensus bands the score into report-card grades; 98 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Cityscape on Belmont's 30.9 kBtu/ft² across 34,033 sq ft works out to about 1.1 billion Btu (308 MWh-equivalent) in 2024. Its source EUI of 72.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 226,809 kWh of electricity, 2,787 therms of natural gas and 742 thousand gallons of water for the year.

Which law requires Cityscape on Belmont to report its energy use?

Cityscape on Belmont reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM20475934:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.