BuildingCensus
–

Conway Building

Urgent Care/Clinic/Other Outpatient in Washington, DC, DC · 4 Atlantic Street SW · 20032

At a glance

Conway Building is a 49,320-square-foot urgent care/clinic/other outpatient building at 4 Atlantic Street SW in Washington, DC, built in 2015. In its 2024 Washington, DC benchmarking disclosure it reported a site energy-use intensity of 59.7 kBtu/ft² and 251 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2024
Site EUI
59.7
kBtu/ft²
GHG emissions
251
tCO₂e
GHG intensity
5.1
kgCO₂e/ft²
Floor area
49,320
sq ft
Year built
2015
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI59.7 kBtu/ft²
Source EUI159.8 kBtu/ft²
GHG emissions251 tCO₂e
GHG intensity5.1 kgCO₂e/ft²
Electricity802,480 kWh
Natural gas2,067 therms
Water use273 kgal
Gross floor area49,320 sq ft
Source recorddc:PM4370646:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest—59.7 kBtu/ft²251 tCO₂e
2023—55.0 kBtu/ft²237 tCO₂e
2022—56.7 kBtu/ft²234 tCO₂e
2021—65.7 kBtu/ft²288 tCO₂e
2020—67.0 kBtu/ft²305 tCO₂e
2019—61.2 kBtu/ft²275 tCO₂e
2018—59.1 kBtu/ft²263 tCO₂e
2017—48.8 kBtu/ft²254 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

COMMUNITY OF HOPE INC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
4 Atlantic Street SW
State
District of Columbia
ZIP
20032
Coordinates
38.83116, -77.00871

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Conway Building compare with other buildings in Washington, DC?

The latest disclosures cover 6,870 benchmarked buildings in Washington, DC. Its site EUI of 59.7 kBtu/ft² is roughly in line with the average of 63.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 5.1 kgCO₂e/ft² is roughly in line with the group average of 5.0 kgCO₂e/ft².

At 49,320 sq ft, it is about 69% below the average floor area of 161,007 sq ft for those buildings. It was built in 2015, 49 years later than the group's average year built (1966).

How has Conway Building's energy performance changed over time?

BuildingCensus holds 8 Washington, DC disclosures for Conway Building, covering report years 2017–2024. Site EUI moved from 48.8 kBtu/ft² (2017) to 59.7 kBtu/ft² (2024), an 22% increase. Reported emissions went from 254 tCO₂e to 251 tCO₂e over the same span (down 1%).

What does a site EUI of 59.7 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Conway Building's 59.7 kBtu/ft² across 49,320 sq ft works out to about 2.9 billion Btu (863 MWh-equivalent) in 2024. Its source EUI of 159.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 802,480 kWh of electricity, 2,067 therms of natural gas and 273 thousand gallons of water for the year.

Which law requires Conway Building to report its energy use?

Conway Building reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM4370646:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More urgent care/clinic/other outpatient buildings in Washington, DC

Frequently asked questions

What is Conway Building's energy grade?

Conway Building did not report an ENERGY STAR score in its 2024 disclosure, but its site energy-use intensity was 59.7 kBtu/ft².

How much energy does Conway Building use?

Its 2024 site energy-use intensity was 59.7 kBtu/ft² (159.8 kBtu/ft² source) across 49,320 sq ft, including 802,480 kWh of electricity and 2,067 therms of natural gas.

What are Conway Building's carbon emissions?

Conway Building reported 251 tCO₂e of greenhouse-gas emissions (5.1 kgCO₂e/ft²) for 2024.

Where is Conway Building?

Conway Building is at 4 Atlantic Street SW, in Washington, DC 20032. Its coordinates are 38.83116, -77.00871 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Conway Building and when was it built?

Conway Building has 49,320 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2015 as its year built. It is classed as urgent care/clinic/other outpatient.

Is Conway Building covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Conway Building, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/conway-building-2cba8036 (data as of July 9, 2026).