DCM-Washington DC Moxy Downtown
Hotel in Washington, DC, DC · 1011 11th Street NW · 20001
At a glance
DCM-Washington DC Moxy Downtown is a 73,727-square-foot hotel at 1011 11th Street NW in Washington, DC, built in 2017. In its 2021 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 85 out of 100 (grade A), a site energy-use intensity of 68.9 kBtu/ft² and 428 tCO₂e of greenhouse-gas emissions. That score is higher than 82% of the 251 scored hotel buildings in Washington, DC.
Clean and Affordable Energy Act / BEPS · reporting year 2021
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 85 (band A) |
| Site EUI | 68.9 kBtu/ft² |
| Source EUI | 166.7 kBtu/ft² |
| GHG emissions | 428 tCO₂e |
| GHG intensity | 5.8 kgCO₂e/ft² |
| Electricity | 1,165,137 kWh |
| Natural gas | 11,060 therms |
| Water use | 1,998 kgal |
| Gross floor area | 73,727 sq ft |
| Source record | dc:PM20474998:2021 |
Compliance context
Clean and Affordable Energy Act / BEPS
DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
Ownership
ALICE RE HOLDINGS LLC
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 1011 11th Street NW
- City
- Washington, DC
- State
- District of Columbia
- ZIP
- 20001
- Coordinates
- 38.90277, -77.02674
Within ~1 km
Nearby benchmarked buildings
Convention Center · 1,750,000 sq ft
- 616 E St.score —
Multifamily Housing · 1,150,961 sq ft
Hotel · 1,081,202 sq ft
Multifamily Housing · 1,075,449 sq ft
Office · 887,915 sq ft
Office · 876,744 sq ft
See also: most efficient in Washington, DC · biggest emitters
How does DCM-Washington DC Moxy Downtown compare with other hotel buildings in Washington, DC?
The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. DCM-Washington DC Moxy Downtown's ENERGY STAR score of 85 compares with an average of 58 across the 251 that report a score; it scores higher than 82% of them and lower than 18%. Its site EUI of 68.9 kBtu/ft² is about 21% below the average of 87.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 5.8 kgCO₂e/ft² is about 16% below the group average of 6.9 kgCO₂e/ft².
At 73,727 sq ft, it is about 68% below the average floor area of 227,860 sq ft for those buildings. It was built in 2017, 43 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².
What does an ENERGY STAR score of 85 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 85 means the building performs better than about 85% of its national peers. BuildingCensus bands the score into report-card grades; 85 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. DCM-Washington DC Moxy Downtown's 68.9 kBtu/ft² across 73,727 sq ft works out to about 5.1 billion Btu (1,489 MWh-equivalent) in 2021. Its source EUI of 166.7 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,165,137 kWh of electricity, 11,060 therms of natural gas and 1,998 thousand gallons of water for the year.
Which law requires DCM-Washington DC Moxy Downtown to report its energy use?
DCM-Washington DC Moxy Downtown reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2021 disclosure (source record dc:PM20474998:2021). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
More hotel buildings in Washington, DC
- Courtyard By Marriott Washington, DC· 73,617 sq ft · score 76 (B)
- Topaz Hotel· 73,373 sq ft · score 65 (C)
- 1010 Vermont Avenue SPE LLC· 73,259 sq ft · EUI 32.5 kBtu/ft²
- Suton Two LLC· 72,004 sq ft · score 42 (D)
- Fairfield Inn & Suites Washington DC/New York Avenue· 71,265 sq ft · score 95 (A)
- Churchill Hotel - WCH· 70,000 sq ft · score 54 (D)
- Hotel buildings in Washington, DC· 257 benchmarked
- All Washington, DC benchmarked buildings· Clean and Affordable Energy Act / BEPS
- Most efficient large buildings in Washington, DC
- Least efficient large buildings in Washington, DC
- Biggest emitters in Washington, DC
Frequently asked questions
What is DCM-Washington DC Moxy Downtown's energy grade?
DCM-Washington DC Moxy Downtown scores 85 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2021 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does DCM-Washington DC Moxy Downtown use?
Its 2021 site energy-use intensity was 68.9 kBtu/ft² (166.7 kBtu/ft² source) across 73,727 sq ft, including 1,165,137 kWh of electricity and 11,060 therms of natural gas.
What are DCM-Washington DC Moxy Downtown's carbon emissions?
DCM-Washington DC Moxy Downtown reported 428 tCO₂e of greenhouse-gas emissions (5.8 kgCO₂e/ft²) for 2021.
Where is DCM-Washington DC Moxy Downtown?
DCM-Washington DC Moxy Downtown is at 1011 11th Street NW, in Washington, DC 20001. Its coordinates are 38.90277, -77.02674 (latitude, longitude), as published in the Building Energy Benchmarking file.
How big is DCM-Washington DC Moxy Downtown and when was it built?
DCM-Washington DC Moxy Downtown has 73,727 sq ft of gross floor area, as reported in its 2021 disclosure. The disclosure lists 2017 as its year built. It is classed as hotel.
Is DCM-Washington DC Moxy Downtown covered by the Clean and Affordable Energy Act / BEPS?
Yes — it appears in the 2021 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.
Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “DCM-Washington DC Moxy Downtown, Washington, DC — 2021 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/dcm-washington-dc-moxy-downtown-8fc4c2ec (data as of July 9, 2026).