BuildingCensus
B

Flats 130 at Constitution Square II

Multifamily Housing in Washington, DC, DC · 130 M Street NE · 20002

At a glance

Flats 130 at Constitution Square II is a 185,341-square-foot multifamily housing building at 130 M Street NE in Washington, DC, built in 2010. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 75 out of 100 (grade B), a site energy-use intensity of 44.6 kBtu/ft² and 784 tCO₂e of greenhouse-gas emissions. That score is higher than 44% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
75
band B · 2017
Site EUI
44.6
kBtu/ft²
GHG emissions
784
tCO₂e
GHG intensity
4.2
kgCO₂e/ft²
Floor area
185,341
sq ft
Year built
2010
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2017

Benchmarking record

FieldValue
ENERGY STAR score75 (band B)
Site EUI44.6 kBtu/ft²
Source EUI114.2 kBtu/ft²
GHG emissions784 tCO₂e
GHG intensity4.2 kgCO₂e/ft²
Electricity1,750,869 kWh
Natural gas22,882 therms
Water use5,267 kgal
Gross floor area185,341 sq ft
Source recorddc:PM4379294:2017

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2017latest7544.6 kBtu/ft²784 tCO₂e
2015—48.2 kBtu/ft²957 tCO₂e
2014—45.2 kBtu/ft²895 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

THE FLATS 130 DC RESIDENTIAL LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
130 M Street NE
State
District of Columbia
ZIP
20002
Coordinates
38.93081, -77.02378

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Flats 130 at Constitution Square II compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Flats 130 at Constitution Square II's ENERGY STAR score of 75 compares with an average of 72 across the 1,618 that report a score; it scores higher than 44% of them and lower than 54%. Its site EUI of 44.6 kBtu/ft² is about 13% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.2 kgCO₂e/ft² is about 11% above the group average of 3.8 kgCO₂e/ft².

At 185,341 sq ft, it is about 36% above the average floor area of 136,346 sq ft for those buildings. It was built in 2010, 45 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Flats 130 at Constitution Square II's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Flats 130 at Constitution Square II, covering report years 2014, 2015, 2017. Site EUI moved from 45.2 kBtu/ft² (2014) to 44.6 kBtu/ft² (2017), a 1% decrease. Reported emissions went from 895 tCO₂e to 784 tCO₂e over the same span (down 12%).

What does an ENERGY STAR score of 75 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 75 means the building performs better than about 75% of its national peers. BuildingCensus bands the score into report-card grades; 75 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Flats 130 at Constitution Square II's 44.6 kBtu/ft² across 185,341 sq ft works out to about 8.3 billion Btu (2,423 MWh-equivalent) in 2017. Its source EUI of 114.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,750,869 kWh of electricity, 22,882 therms of natural gas and 5,267 thousand gallons of water for the year.

Which law requires Flats 130 at Constitution Square II to report its energy use?

Flats 130 at Constitution Square II reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM4379294:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Flats 130 at Constitution Square II's energy grade?

Flats 130 at Constitution Square II scores 75 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Flats 130 at Constitution Square II use?

Its 2017 site energy-use intensity was 44.6 kBtu/ft² (114.2 kBtu/ft² source) across 185,341 sq ft, including 1,750,869 kWh of electricity and 22,882 therms of natural gas.

What are Flats 130 at Constitution Square II's carbon emissions?

Flats 130 at Constitution Square II reported 784 tCO₂e of greenhouse-gas emissions (4.2 kgCO₂e/ft²) for 2017.

Where is Flats 130 at Constitution Square II?

Flats 130 at Constitution Square II is at 130 M Street NE, in Washington, DC 20002. Its coordinates are 38.93081, -77.02378 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Flats 130 at Constitution Square II and when was it built?

Flats 130 at Constitution Square II has 185,341 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 2010 as its year built. It is classed as multifamily housing.

Is Flats 130 at Constitution Square II covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Flats 130 at Constitution Square II, Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/flats-130-at-constitution-square-ii-5e0eb357 (data as of July 9, 2026).