BuildingCensus
–

Fourth District Station

Other in Washington, DC, DC · 4 DC Village Lane SW · 20032

At a glance

Fourth District Station is a 33,743-square-foot other building at 4 DC Village Lane SW in Washington, DC, built in 2011. In its 2018 Washington, DC benchmarking disclosure it reported a site energy-use intensity of 66.1 kBtu/ft² and 226 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2018
Site EUI
66.1
kBtu/ft²
GHG emissions
226
tCO₂e
GHG intensity
6.7
kgCO₂e/ft²
Floor area
33,743
sq ft
Year built
2011
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2018

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI66.1 kBtu/ft²
Source EUI185.0 kBtu/ft²
GHG emissions226 tCO₂e
GHG intensity6.7 kgCO₂e/ft²
Electricity653,557 kWh
Natural gas0 therms
Gross floor area33,743 sq ft
Source recorddc:PM3412608:2018

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

WASHINGTON METROPOLITAN AREA TRANSIT AUTHORITY

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
4 DC Village Lane SW
State
District of Columbia
ZIP
20032
Coordinates
38.81526, -77.01672

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Fourth District Station compare with other other buildings in Washington, DC?

The latest disclosures cover 32 other buildings in Washington, DC, out of 6,870 buildings citywide. Its site EUI of 66.1 kBtu/ft² is about 28% below the average of 91.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 6.7 kgCO₂e/ft² is about 23% below the group average of 8.7 kgCO₂e/ft².

At 33,743 sq ft, it is about 72% below the average floor area of 122,237 sq ft for those buildings. It was built in 2011, 50 years later than the group's average year built (1961). Across all 24 jurisdictions BuildingCensus covers, the 1,327 other buildings average an ENERGY STAR score of 60 and a site EUI of 63.3 kBtu/ft².

What does a site EUI of 66.1 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Fourth District Station's 66.1 kBtu/ft² across 33,743 sq ft works out to about 2.2 billion Btu (654 MWh-equivalent) in 2018. Its source EUI of 185.0 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 653,557 kWh of electricity and 0 therms of natural gas for the year.

Which law requires Fourth District Station to report its energy use?

Fourth District Station reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2018 disclosure (source record dc:PM3412608:2018). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More other buildings in Washington, DC

Frequently asked questions

What is Fourth District Station's energy grade?

Fourth District Station did not report an ENERGY STAR score in its 2018 disclosure, but its site energy-use intensity was 66.1 kBtu/ft².

How much energy does Fourth District Station use?

Its 2018 site energy-use intensity was 66.1 kBtu/ft² (185.0 kBtu/ft² source) across 33,743 sq ft, including 653,557 kWh of electricity and 0 therms of natural gas.

What are Fourth District Station's carbon emissions?

Fourth District Station reported 226 tCO₂e of greenhouse-gas emissions (6.7 kgCO₂e/ft²) for 2018.

Where is Fourth District Station?

Fourth District Station is at 4 DC Village Lane SW, in Washington, DC 20032. Its coordinates are 38.81526, -77.01672 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Fourth District Station and when was it built?

Fourth District Station has 33,743 sq ft of gross floor area, as reported in its 2018 disclosure. The disclosure lists 2011 as its year built. It is classed as other.

Is Fourth District Station covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2018 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Fourth District Station, Washington, DC — 2018 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/fourth-district-station-23a0527c (data as of July 9, 2026).