Glover Park Hotel
Hotel in Washington, DC, DC · 2505 Wisconsin Avenue, N.W. · 20007
At a glance
Glover Park Hotel is a 119,561-square-foot hotel at 2505 Wisconsin Avenue, N.W. in Washington, DC, built in 1971. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 57 out of 100 (grade C), a site energy-use intensity of 86.1 kBtu/ft² and 864 tCO₂e of greenhouse-gas emissions. That score is higher than 43% of the 251 scored hotel buildings in Washington, DC.
Clean and Affordable Energy Act / BEPS · reporting year 2017
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 57 (band C) |
| Site EUI | 86.1 kBtu/ft² |
| Source EUI | 186.4 kBtu/ft² |
| GHG emissions | 864 tCO₂e |
| GHG intensity | 7.2 kgCO₂e/ft² |
| Electricity | 1,608,738 kWh |
| Natural gas | 48,095 therms |
| Water use | 6,057 kgal |
| Gross floor area | 119,561 sq ft |
| Source record | dc:PM4475485:2017 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2017latest | 57 | -20 | 86.1 kBtu/ft² | 864 tCO₂e |
| 2016 | 77 | +6 | 69.0 kBtu/ft² | 741 tCO₂e |
| 2015 | 71 | +13 | 69.6 kBtu/ft² | 891 tCO₂e |
| 2014 | 58 | 80.9 kBtu/ft² | 1,008 tCO₂e |
Compliance context
Clean and Affordable Energy Act / BEPS
DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
Ownership
CS BOND ST S PROPERTIES LLC
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 2505 Wisconsin Avenue, N.W.
- City
- Washington, DC
- State
- District of Columbia
- ZIP
- 20007
- Coordinates
- 38.92336, -77.07276
Within ~1 km
Nearby benchmarked buildings
- The Westchester Corporationscore 97
Multifamily Housing · 989,860 sq ft
- The Colonnade Condominiumscore 94
Multifamily Housing · 593,037 sq ft
- The Colonnade Condominiumscore —
Multifamily Housing · 425,000 sq ft
- Carillon Housescore 75
Multifamily Housing · 359,473 sq ft
- Carillon Housescore —
Multifamily Housing · 330,646 sq ft
Multifamily Housing · 313,484 sq ft
See also: most efficient in Washington, DC · biggest emitters
How does Glover Park Hotel compare with other hotel buildings in Washington, DC?
The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. Glover Park Hotel's ENERGY STAR score of 57 compares with an average of 58 across the 251 that report a score; it scores higher than 43% of them and lower than 54%. Its site EUI of 86.1 kBtu/ft² is roughly in line with the average of 87.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 7.2 kgCO₂e/ft² is roughly in line with the group average of 6.9 kgCO₂e/ft².
At 119,561 sq ft, it is about half of the average floor area of 227,860 sq ft for those buildings. It was built in 1971, 3 years earlier than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².
How has Glover Park Hotel's energy performance changed over time?
BuildingCensus holds 4 Washington, DC disclosures for Glover Park Hotel, covering report years 2014–2017. Its ENERGY STAR score went from 58 in 2014 to 57 in 2017 (-1 points); its best year on file was 2016, at 77. Site EUI moved from 80.9 kBtu/ft² (2014) to 86.1 kBtu/ft² (2017), an 6% increase. Reported emissions went from 1,008 tCO₂e to 864 tCO₂e over the same span (down 14%).
What does an ENERGY STAR score of 57 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 57 means the building performs better than about 57% of its national peers. BuildingCensus bands the score into report-card grades; 57 falls in band C — below median (55–69). It sits 18 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Glover Park Hotel's 86.1 kBtu/ft² across 119,561 sq ft works out to about 10.3 billion Btu (3,017 MWh-equivalent) in 2017. Its source EUI of 186.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,608,738 kWh of electricity, 48,095 therms of natural gas and 6,057 thousand gallons of water for the year.
Which law requires Glover Park Hotel to report its energy use?
Glover Park Hotel reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM4475485:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
More hotel buildings in Washington, DC
- The Churchill Hotel· 116,503 sq ft · score 88 (A)
- Cambria DC· 116,493 sq ft · score 22 (D)
- Riggs DC· 115,800 sq ft · score 9 (D)
- The Hay Adams· 115,030 sq ft · score 6 (D)
- Canopy by Hilton Washington DC | The Wharf· 115,000 sq ft · score 49 (D)
- Hotel Rouge· 114,073 sq ft · score 72 (B)
- Hotel buildings in Washington, DC· 257 benchmarked
- All Washington, DC benchmarked buildings· Clean and Affordable Energy Act / BEPS
- Most efficient large buildings in Washington, DC
- Least efficient large buildings in Washington, DC
- Biggest emitters in Washington, DC
Frequently asked questions
What is Glover Park Hotel's energy grade?
Glover Park Hotel scores 57 out of 100 on ENERGY STAR — band C, below median (55–69) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Glover Park Hotel use?
Its 2017 site energy-use intensity was 86.1 kBtu/ft² (186.4 kBtu/ft² source) across 119,561 sq ft, including 1,608,738 kWh of electricity and 48,095 therms of natural gas.
What are Glover Park Hotel's carbon emissions?
Glover Park Hotel reported 864 tCO₂e of greenhouse-gas emissions (7.2 kgCO₂e/ft²) for 2017.
Where is Glover Park Hotel?
Glover Park Hotel is at 2505 Wisconsin Avenue, N.W., in Washington, DC 20007. Its coordinates are 38.92336, -77.07276 (latitude, longitude), as published in the Building Energy Benchmarking file.
How big is Glover Park Hotel and when was it built?
Glover Park Hotel has 119,561 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 1971 as its year built. It is classed as hotel.
Is Glover Park Hotel covered by the Clean and Affordable Energy Act / BEPS?
Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.
Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Glover Park Hotel, Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/glover-park-hotel-fc943f52 (data as of July 9, 2026).