BuildingCensus
B

Halley Place

Multifamily Housing in Washington, DC, DC · 10 Halley Place, SE · 20032

At a glance

Halley Place is a 38,056-square-foot multifamily housing building at 10 Halley Place, SE in Washington, DC, built in 2002. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 72 out of 100 (grade B), a site energy-use intensity of 54.0 kBtu/ft² and 127 tCO₂e of greenhouse-gas emissions. That score is higher than 40% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
72
band B · 2024
Site EUI
54.0
kBtu/ft²
GHG emissions
127
tCO₂e
GHG intensity
3.4
kgCO₂e/ft²
Floor area
38,056
sq ft
Year built
2002
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score72 (band B)
Site EUI54.0 kBtu/ft²
Source EUI88.4 kBtu/ft²
GHG emissions127 tCO₂e
GHG intensity3.4 kgCO₂e/ft²
Electricity201,886 kWh
Natural gas13,666 therms
Water use1,966 kgal
Gross floor area38,056 sq ft
Source recorddc:PM20637976:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest72+1154.0 kBtu/ft²127 tCO₂e
202361-655.2 kBtu/ft²138 tCO₂e
20226758.7 kBtu/ft²145 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

HALLEY PLACE CONDOMINIUM

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
10 Halley Place, SE
State
District of Columbia
ZIP
20032
Coordinates
38.83541, -77.00686

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Halley Place compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Halley Place's ENERGY STAR score of 72 compares with an average of 72 across the 1,618 that report a score; it scores higher than 40% of them and lower than 59%. Its site EUI of 54.0 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft². Its emissions intensity of 3.4 kgCO₂e/ft² is about 12% below the group average of 3.8 kgCO₂e/ft².

At 38,056 sq ft, it is about 72% below the average floor area of 136,346 sq ft for those buildings. It was built in 2002, 37 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Halley Place's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Halley Place, covering report years 2022–2024. Its ENERGY STAR score went from 67 in 2022 to 72 in 2024 (+5 points). Site EUI moved from 58.7 kBtu/ft² (2022) to 54.0 kBtu/ft² (2024), a 8% decrease. Reported emissions went from 145 tCO₂e to 127 tCO₂e over the same span (down 12%).

What does an ENERGY STAR score of 72 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Halley Place's 54.0 kBtu/ft² across 38,056 sq ft works out to about 2.1 billion Btu (602 MWh-equivalent) in 2024. Its source EUI of 88.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 201,886 kWh of electricity, 13,666 therms of natural gas and 1,966 thousand gallons of water for the year.

Which law requires Halley Place to report its energy use?

Halley Place reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM20637976:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Halley Place's energy grade?

Halley Place scores 72 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Halley Place use?

Its 2024 site energy-use intensity was 54.0 kBtu/ft² (88.4 kBtu/ft² source) across 38,056 sq ft, including 201,886 kWh of electricity and 13,666 therms of natural gas.

What are Halley Place's carbon emissions?

Halley Place reported 127 tCO₂e of greenhouse-gas emissions (3.4 kgCO₂e/ft²) for 2024.

Where is Halley Place?

Halley Place is at 10 Halley Place, SE, in Washington, DC 20032. Its coordinates are 38.83541, -77.00686 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Halley Place and when was it built?

Halley Place has 38,056 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2002 as its year built. It is classed as multifamily housing.

Is Halley Place covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Halley Place, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/halley-place-04c2c4da (data as of July 9, 2026).