Hillwood Condominiums

How does Hillwood Condominiums compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Hillwood Condominiums's ENERGY STAR score of 86 compares with an average of 72 across the 1,618 that report a score; it scores higher than 61% of them and lower than 37%. Its site EUI of 34.5 kBtu/ft² is about 32% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.3 kgCO₂e/ft² is about 39% below the group average of 3.8 kgCO₂e/ft².

At 89,340 sq ft, it is about 34% below the average floor area of 136,346 sq ft for those buildings. Its 1965 construction date is close to the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Hillwood Condominiums's energy performance changed over time?

BuildingCensus holds 7 Washington, DC disclosures for Hillwood Condominiums, covering report years 2018–2024. Its ENERGY STAR score went from 80 in 2018 to 86 in 2024 (+6 points). Site EUI moved from 43.8 kBtu/ft² (2018) to 34.5 kBtu/ft² (2024), a 21% decrease. Reported emissions went from 261 tCO₂e to 207 tCO₂e over the same span (down 21%).

What does an ENERGY STAR score of 86 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 86 means the building performs better than about 86% of its national peers. BuildingCensus bands the score into report-card grades; 86 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Hillwood Condominiums's 34.5 kBtu/ft² across 89,340 sq ft works out to about 3.1 billion Btu (903 MWh-equivalent) in 2024. Its source EUI of 60.8 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 367,833 kWh of electricity, 18,233 therms of natural gas and 4,575 thousand gallons of water for the year.

Which law requires Hillwood Condominiums to report its energy use?

Hillwood Condominiums reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM25559895:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.