BuildingCensus
D

Hotel Monaco DC

Hotel in Washington, DC, DC · 700 F Street NW · 20004

At a glance

Hotel Monaco DC is a 175,900-square-foot hotel at 700 F Street NW in Washington, DC, built in 2001. In its 2018 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 35 out of 100 (grade D), a site energy-use intensity of 120.4 kBtu/ft² and 1,536 tCO₂e of greenhouse-gas emissions. That score is higher than 20% of the 251 scored hotel buildings in Washington, DC.

ENERGY STAR score
35
band D · 2018
Site EUI
120.4
kBtu/ft²
GHG emissions
1,536
tCO₂e
GHG intensity
8.7
kgCO₂e/ft²
Floor area
175,900
sq ft
Year built
2001
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2018

Benchmarking record

FieldValue
ENERGY STAR score35 (band D)
Site EUI120.4 kBtu/ft²
Source EUI211.3 kBtu/ft²
GHG emissions1,536 tCO₂e
GHG intensity8.7 kgCO₂e/ft²
Electricity2,501,007 kWh
Natural gas126,433 therms
Water use7,198 kgal
Gross floor area175,900 sq ft
Source recorddc:PM2517260:2018

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2018latest35+5120.4 kBtu/ft²1,536 tCO₂e
201530-2118.5 kBtu/ft²1,816 tCO₂e
201432118.5 kBtu/ft²1,786 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

KIMPTON HOTEL MONACO WASHINGTON DC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
700 F Street NW
State
District of Columbia
ZIP
20004
Coordinates
38.89639, -77.02245

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Hotel Monaco DC compare with other hotel buildings in Washington, DC?

The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. Hotel Monaco DC's ENERGY STAR score of 35 compares with an average of 58 across the 251 that report a score; it scores higher than 20% of them and lower than 78%. Its site EUI of 120.4 kBtu/ft² is about 37% above the average of 87.6 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 8.7 kgCO₂e/ft² is about 26% above the group average of 6.9 kgCO₂e/ft².

At 175,900 sq ft, it is about 23% below the average floor area of 227,860 sq ft for those buildings. It was built in 2001, 27 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².

How has Hotel Monaco DC's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Hotel Monaco DC, covering report years 2014, 2015, 2018. Its ENERGY STAR score went from 32 in 2014 to 35 in 2018 (+3 points). Site EUI moved from 118.5 kBtu/ft² (2014) to 120.4 kBtu/ft² (2018), an 2% increase. Reported emissions went from 1,786 tCO₂e to 1,536 tCO₂e over the same span (down 14%).

What does an ENERGY STAR score of 35 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 35 means the building performs better than about 35% of its national peers. BuildingCensus bands the score into report-card grades; 35 falls in band D — lowest band (1–54). It sits 40 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Hotel Monaco DC's 120.4 kBtu/ft² across 175,900 sq ft works out to about 21.2 billion Btu (6,207 MWh-equivalent) in 2018. Its source EUI of 211.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 2,501,007 kWh of electricity, 126,433 therms of natural gas and 7,198 thousand gallons of water for the year.

Which law requires Hotel Monaco DC to report its energy use?

Hotel Monaco DC reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2018 disclosure (source record dc:PM2517260:2018). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More hotel buildings in Washington, DC

Frequently asked questions

What is Hotel Monaco DC's energy grade?

Hotel Monaco DC scores 35 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2018 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Hotel Monaco DC use?

Its 2018 site energy-use intensity was 120.4 kBtu/ft² (211.3 kBtu/ft² source) across 175,900 sq ft, including 2,501,007 kWh of electricity and 126,433 therms of natural gas.

What are Hotel Monaco DC's carbon emissions?

Hotel Monaco DC reported 1,536 tCO₂e of greenhouse-gas emissions (8.7 kgCO₂e/ft²) for 2018.

Where is Hotel Monaco DC?

Hotel Monaco DC is at 700 F Street NW, in Washington, DC 20004. Its coordinates are 38.89639, -77.02245 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Hotel Monaco DC and when was it built?

Hotel Monaco DC has 175,900 sq ft of gross floor area, as reported in its 2018 disclosure. The disclosure lists 2001 as its year built. It is classed as hotel.

Is Hotel Monaco DC covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2018 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Hotel Monaco DC, Washington, DC — 2018 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/hotel-monaco-dc-ac217533 (data as of July 9, 2026).