Hyatt Place National Mall
Hotel in Washington, DC, DC · 400 E. ST SW · 20024
At a glance
Hyatt Place National Mall is a 208,241-square-foot hotel at 400 E. ST SW in Washington, DC, built in 2015. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 72 out of 100 (grade B), a site energy-use intensity of 61.9 kBtu/ft² and 1,073 tCO₂e of greenhouse-gas emissions. That score is higher than 66% of the 251 scored hotel buildings in Washington, DC.
Clean and Affordable Energy Act / BEPS · reporting year 2024
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 72 (band B) |
| Site EUI | 61.9 kBtu/ft² |
| Source EUI | 159.2 kBtu/ft² |
| GHG emissions | 1,073 tCO₂e |
| GHG intensity | 5.2 kgCO₂e/ft² |
| Electricity | 3,288,140 kWh |
| Natural gas | 16,634 therms |
| Water use | 7,422 kgal |
| Gross floor area | 208,241 sq ft |
| Source record | dc:PM25337911:2024 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2024latest | 72 | -1 | 61.9 kBtu/ft² | 1,073 tCO₂e |
| 2023 | 73 | +5 | 60.5 kBtu/ft² | 1,070 tCO₂e |
| 2022 | 68 | 57.4 kBtu/ft² | 991 tCO₂e |
Compliance context
Clean and Affordable Energy Act / BEPS
DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
Ownership
CITY PARTNERS LLC
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 400 E. ST SW
- City
- Washington, DC
- State
- District of Columbia
- ZIP
- 20024
- Coordinates
- 38.88306, -77.01796
Within ~1 km
Nearby benchmarked buildings
- Constitution Centerscore 83
Office · 1,582,262 sq ft
- Waterside Towers and Townhomesscore 81
Multifamily Housing · 674,080 sq ft
- Two Independence Squarescore 99
Office · 634,947 sq ft
- The Channel (lh71)score —
Multifamily Housing · 603,003 sq ft
- Capital Galleryscore 74
Office · 572,811 sq ft
- 670 Mainescore 69
Office · 571,109 sq ft
See also: most efficient in Washington, DC · biggest emitters
How does Hyatt Place National Mall compare with other hotel buildings in Washington, DC?
The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. Hyatt Place National Mall's ENERGY STAR score of 72 compares with an average of 58 across the 251 that report a score; it scores higher than 66% of them and lower than 32%. Its site EUI of 61.9 kBtu/ft² is about 29% below the average of 87.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 5.2 kgCO₂e/ft² is about 25% below the group average of 6.9 kgCO₂e/ft².
At 208,241 sq ft, it is roughly in line with the average floor area of 227,860 sq ft for those buildings. It was built in 2015, 41 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².
How has Hyatt Place National Mall's energy performance changed over time?
BuildingCensus holds 3 Washington, DC disclosures for Hyatt Place National Mall, covering report years 2022–2024. Its ENERGY STAR score went from 68 in 2022 to 72 in 2024 (+4 points); its best year on file was 2023, at 73. Site EUI moved from 57.4 kBtu/ft² (2022) to 61.9 kBtu/ft² (2024), an 8% increase. Reported emissions went from 991 tCO₂e to 1,073 tCO₂e over the same span (up 8%).
What does an ENERGY STAR score of 72 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 72 means the building performs better than about 72% of its national peers. BuildingCensus bands the score into report-card grades; 72 falls in band B — above median (70–84). It sits 3 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Hyatt Place National Mall's 61.9 kBtu/ft² across 208,241 sq ft works out to about 12.9 billion Btu (3,778 MWh-equivalent) in 2024. Its source EUI of 159.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 3,288,140 kWh of electricity, 16,634 therms of natural gas and 7,422 thousand gallons of water for the year.
Which law requires Hyatt Place National Mall to report its energy use?
Hyatt Place National Mall reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM25337911:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
More hotel buildings in Washington, DC
- Yours Truly DC· 207,478 sq ft · score 54 (D)
- St. Regis Washington DC· 205,000 sq ft · score 24 (D)
- 9673w-M Street Hotel· 198,000 sq ft · score 42 (D)
- 9673w-Renaissance - Dupont Circle· 198,000 sq ft · score 26 (D)
- Residence Inn Capitol· 193,530 sq ft · score 55 (C)
- The Melrose Hotel· 190,400 sq ft · score 68 (C)
- Hotel buildings in Washington, DC· 257 benchmarked
- All Washington, DC benchmarked buildings· Clean and Affordable Energy Act / BEPS
- Most efficient large buildings in Washington, DC
- Least efficient large buildings in Washington, DC
- Biggest emitters in Washington, DC
Frequently asked questions
What is Hyatt Place National Mall's energy grade?
Hyatt Place National Mall scores 72 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Hyatt Place National Mall use?
Its 2024 site energy-use intensity was 61.9 kBtu/ft² (159.2 kBtu/ft² source) across 208,241 sq ft, including 3,288,140 kWh of electricity and 16,634 therms of natural gas.
What are Hyatt Place National Mall's carbon emissions?
Hyatt Place National Mall reported 1,073 tCO₂e of greenhouse-gas emissions (5.2 kgCO₂e/ft²) for 2024.
Where is Hyatt Place National Mall?
Hyatt Place National Mall is at 400 E. ST SW, in Washington, DC 20024. Its coordinates are 38.88306, -77.01796 (latitude, longitude), as published in the Building Energy Benchmarking file.
How big is Hyatt Place National Mall and when was it built?
Hyatt Place National Mall has 208,241 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2015 as its year built. It is classed as hotel.
Is Hyatt Place National Mall covered by the Clean and Affordable Energy Act / BEPS?
Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.
Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Hyatt Place National Mall, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/hyatt-place-national-mall-0e328749 (data as of July 9, 2026).