BuildingCensus
–

Jemal's Benjo

Multifamily Housing in Washington, DC, DC · 875 N St NW · 20001

At a glance

Jemal's Benjo is a 32,311-square-foot multifamily housing building at 875 N St NW in Washington, DC, built in 1900. In its 2023 Washington, DC benchmarking disclosure it reported a site energy-use intensity of 31.9 kBtu/ft² and 90 tCO₂e of greenhouse-gas emissions.

ENERGY STAR score
—
not reported · 2023
Site EUI
31.9
kBtu/ft²
GHG emissions
90
tCO₂e
GHG intensity
2.8
kgCO₂e/ft²
Floor area
32,311
sq ft
Year built
1900
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2023

Benchmarking record

FieldValue
ENERGY STAR score—
Site EUI31.9 kBtu/ft²
Source EUI89.0 kBtu/ft²
GHG emissions90 tCO₂e
GHG intensity2.8 kgCO₂e/ft²
Electricity300,381 kWh
Natural gas52 therms
Water use263 kgal
Gross floor area32,311 sq ft
Source recorddc:PM20474443:2023

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2023latest—31.9 kBtu/ft²90 tCO₂e
2022—30.9 kBtu/ft²87 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

JEMAL'S BENJO LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
875 N St NW
State
District of Columbia
ZIP
20001
Coordinates
38.90742, -77.02376

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Jemal's Benjo compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Its site EUI of 31.9 kBtu/ft² is about 38% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.8 kgCO₂e/ft² is about 27% below the group average of 3.8 kgCO₂e/ft².

At 32,311 sq ft, it is about 76% below the average floor area of 136,346 sq ft for those buildings. It was built in 1900, 65 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Jemal's Benjo's energy performance changed over time?

BuildingCensus holds 2 Washington, DC disclosures for Jemal's Benjo, covering report years 2022–2023. Site EUI moved from 30.9 kBtu/ft² (2022) to 31.9 kBtu/ft² (2023), an 3% increase. Reported emissions went from 87 tCO₂e to 90 tCO₂e over the same span (up 3%).

What does a site EUI of 31.9 kBtu/ft² mean?

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Jemal's Benjo's 31.9 kBtu/ft² across 32,311 sq ft works out to about 1 billion Btu (302 MWh-equivalent) in 2023. Its source EUI of 89.0 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 300,381 kWh of electricity, 52 therms of natural gas and 263 thousand gallons of water for the year.

Which law requires Jemal's Benjo to report its energy use?

Jemal's Benjo reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2023 disclosure (source record dc:PM20474443:2023). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Jemal's Benjo's energy grade?

Jemal's Benjo did not report an ENERGY STAR score in its 2023 disclosure, but its site energy-use intensity was 31.9 kBtu/ft².

How much energy does Jemal's Benjo use?

Its 2023 site energy-use intensity was 31.9 kBtu/ft² (89.0 kBtu/ft² source) across 32,311 sq ft, including 300,381 kWh of electricity and 52 therms of natural gas.

What are Jemal's Benjo's carbon emissions?

Jemal's Benjo reported 90 tCO₂e of greenhouse-gas emissions (2.8 kgCO₂e/ft²) for 2023.

Where is Jemal's Benjo?

Jemal's Benjo is at 875 N St NW, in Washington, DC 20001. Its coordinates are 38.90742, -77.02376 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Jemal's Benjo and when was it built?

Jemal's Benjo has 32,311 sq ft of gross floor area, as reported in its 2023 disclosure. The disclosure lists 1900 as its year built. It is classed as multifamily housing.

Is Jemal's Benjo covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2023 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Jemal's Benjo, Washington, DC — 2023 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/jemal-s-benjo-f7b93203 (data as of July 9, 2026).