BuildingCensus
A

Maryland Condominium (new)

Multifamily Housing in Washington, DC, DC · 1350 Maryland Avenue NE · 20002

At a glance

Maryland Condominium (new) is a 77,441-square-foot multifamily housing building at 1350 Maryland Avenue NE in Washington, DC, built in 2015. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 95 out of 100 (grade A), a site energy-use intensity of 28.7 kBtu/ft² and 194 tCO₂e of greenhouse-gas emissions. That score is higher than 82% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
95
band A · 2024
Site EUI
28.7
kBtu/ft²
GHG emissions
194
tCO₂e
GHG intensity
2.5
kgCO₂e/ft²
Floor area
77,441
sq ft
Year built
2015
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score95 (band A)
Site EUI28.7 kBtu/ft²
Source EUI78.6 kBtu/ft²
GHG emissions194 tCO₂e
GHG intensity2.5 kgCO₂e/ft²
Electricity628,181 kWh
Natural gas512 therms
Water use1,899 kgal
Gross floor area77,441 sq ft
Source recorddc:PM36776646:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest95+328.7 kBtu/ft²194 tCO₂e
20239229.4 kBtu/ft²198 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

THE MARYLAND CONDO

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1350 Maryland Avenue NE
State
District of Columbia
ZIP
20002
Coordinates
38.89961, -76.98577

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Maryland Condominium (new) compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Maryland Condominium (new)'s ENERGY STAR score of 95 compares with an average of 72 across the 1,618 that report a score; it scores higher than 82% of them and lower than 16%. Its site EUI of 28.7 kBtu/ft² is about 44% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.5 kgCO₂e/ft² is about 34% below the group average of 3.8 kgCO₂e/ft².

At 77,441 sq ft, it is about 43% below the average floor area of 136,346 sq ft for those buildings. It was built in 2015, 50 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Maryland Condominium (new)'s energy performance changed over time?

BuildingCensus holds 2 Washington, DC disclosures for Maryland Condominium (new), covering report years 2023–2024. Its ENERGY STAR score went from 92 in 2023 to 95 in 2024 (+3 points). Site EUI moved from 29.4 kBtu/ft² (2023) to 28.7 kBtu/ft² (2024), a 2% decrease. Reported emissions went from 198 tCO₂e to 194 tCO₂e over the same span (down 2%).

What does an ENERGY STAR score of 95 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 95 means the building performs better than about 95% of its national peers. BuildingCensus bands the score into report-card grades; 95 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Maryland Condominium (new)'s 28.7 kBtu/ft² across 77,441 sq ft works out to about 2.2 billion Btu (651 MWh-equivalent) in 2024. Its source EUI of 78.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 628,181 kWh of electricity, 512 therms of natural gas and 1,899 thousand gallons of water for the year.

Which law requires Maryland Condominium (new) to report its energy use?

Maryland Condominium (new) reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM36776646:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Maryland Condominium (new)'s energy grade?

Maryland Condominium (new) scores 95 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Maryland Condominium (new) use?

Its 2024 site energy-use intensity was 28.7 kBtu/ft² (78.6 kBtu/ft² source) across 77,441 sq ft, including 628,181 kWh of electricity and 512 therms of natural gas.

What are Maryland Condominium (new)'s carbon emissions?

Maryland Condominium (new) reported 194 tCO₂e of greenhouse-gas emissions (2.5 kgCO₂e/ft²) for 2024.

Where is Maryland Condominium (new)?

Maryland Condominium (new) is at 1350 Maryland Avenue NE, in Washington, DC 20002. Its coordinates are 38.89961, -76.98577 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Maryland Condominium (new) and when was it built?

Maryland Condominium (new) has 77,441 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2015 as its year built. It is classed as multifamily housing.

Is Maryland Condominium (new) covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Maryland Condominium (new), Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/maryland-condominium-new-9773fd8d (data as of July 9, 2026).