BuildingCensus
A

Metro Village - 7053

Multifamily Housing in Washington, DC, DC · 7053 Spring Place NW · 20012

At a glance

Metro Village - 7053 is a 65,500-square-foot multifamily housing building at 7053 Spring Place NW in Washington, DC, built in 2016. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 88 out of 100 (grade A), a site energy-use intensity of 39.6 kBtu/ft² and 205 tCO₂e of greenhouse-gas emissions. That score is higher than 65% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
88
band A · 2024
Site EUI
39.6
kBtu/ft²
GHG emissions
205
tCO₂e
GHG intensity
3.1
kgCO₂e/ft²
Floor area
65,500
sq ft
Year built
2016
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score88 (band A)
Site EUI39.6 kBtu/ft²
Source EUI93.2 kBtu/ft²
GHG emissions205 tCO₂e
GHG intensity3.1 kgCO₂e/ft²
Electricity565,676 kWh
Natural gas6,653 therms
Water use4,899 kgal
Gross floor area65,500 sq ft
Source recorddc:PM33098979:2024

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

TAKOMA SPRING PLACE LP

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
7053 Spring Place NW
State
District of Columbia
ZIP
20012
Coordinates
38.97628, -77.01909

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Metro Village - 7053 compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Metro Village - 7053's ENERGY STAR score of 88 compares with an average of 72 across the 1,618 that report a score; it scores higher than 65% of them and lower than 32%. Its site EUI of 39.6 kBtu/ft² is about 23% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.1 kgCO₂e/ft² is about 18% below the group average of 3.8 kgCO₂e/ft².

At 65,500 sq ft, it is about half of the average floor area of 136,346 sq ft for those buildings. It was built in 2016, 51 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

What does an ENERGY STAR score of 88 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 88 means the building performs better than about 88% of its national peers. BuildingCensus bands the score into report-card grades; 88 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Metro Village - 7053's 39.6 kBtu/ft² across 65,500 sq ft works out to about 2.6 billion Btu (760 MWh-equivalent) in 2024. Its source EUI of 93.2 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 565,676 kWh of electricity, 6,653 therms of natural gas and 4,899 thousand gallons of water for the year.

Which law requires Metro Village - 7053 to report its energy use?

Metro Village - 7053 reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM33098979:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Metro Village - 7053's energy grade?

Metro Village - 7053 scores 88 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Metro Village - 7053 use?

Its 2024 site energy-use intensity was 39.6 kBtu/ft² (93.2 kBtu/ft² source) across 65,500 sq ft, including 565,676 kWh of electricity and 6,653 therms of natural gas.

What are Metro Village - 7053's carbon emissions?

Metro Village - 7053 reported 205 tCO₂e of greenhouse-gas emissions (3.1 kgCO₂e/ft²) for 2024.

Where is Metro Village - 7053?

Metro Village - 7053 is at 7053 Spring Place NW, in Washington, DC 20012. Its coordinates are 38.97628, -77.01909 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Metro Village - 7053 and when was it built?

Metro Village - 7053 has 65,500 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 2016 as its year built. It is classed as multifamily housing.

Is Metro Village - 7053 covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Metro Village - 7053, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/metro-village-7053-3eead216 (data as of July 9, 2026).