Monsenor Romero
Multifamily Housing in Washington, DC, DC · 3145 Mount Pleasant St NW · 20010
At a glance
Monsenor Romero is a 50,000-square-foot multifamily housing building at 3145 Mount Pleasant St NW in Washington, DC, built in 1912. In its 2017 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 52 out of 100 (grade D), a site energy-use intensity of 43.7 kBtu/ft² and 214 tCO₂e of greenhouse-gas emissions. That score is higher than 20% of the 1,618 scored multifamily housing buildings in Washington, DC.
Clean and Affordable Energy Act / BEPS · reporting year 2017
Benchmarking record
| Field | Value |
|---|---|
| ENERGY STAR score | 52 (band D) |
| Site EUI | 43.7 kBtu/ft² |
| Source EUI | 116.3 kBtu/ft² |
| GHG emissions | 214 tCO₂e |
| GHG intensity | 4.3 kgCO₂e/ft² |
| Electricity | 493,940 kWh |
| Natural gas | 5,002 therms |
| Water use | 2,852 kgal |
| Gross floor area | 50,000 sq ft |
| Source record | dc:PM5824467:2017 |
The disclosure history
Year over year
| Year | Score | Δ | Site EUI | GHG emissions |
|---|---|---|---|---|
| 2017latest | 52 | -48 | 43.7 kBtu/ft² | 214 tCO₂e |
| 2016 | 100 | 23.8 kBtu/ft² | 98 tCO₂e |
Compliance context
Clean and Affordable Energy Act / BEPS
DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
Ownership
3145 MOUNT PLEASANT ST LP
Own or manage this building? Claim it to correct the record and get compliance alerts.
Location
- Address
- 3145 Mount Pleasant St NW
- City
- Washington, DC
- State
- District of Columbia
- ZIP
- 20010
- Coordinates
- 38.92986, -77.03757
Within ~1 km
Nearby benchmarked buildings
- The Woodner Apartmentsscore 89
Multifamily Housing · 743,658 sq ft
- DC USAscore —
Enclosed Mall · 546,000 sq ft
- Dorchester House Apartmentsscore 86
Multifamily Housing · 439,502 sq ft
Multifamily Housing · 388,053 sq ft
K-12 School · 325,248 sq ft
K-12 School · 325,217 sq ft
See also: most efficient in Washington, DC · biggest emitters
How does Monsenor Romero compare with other multifamily housing buildings in Washington, DC?
The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Monsenor Romero's ENERGY STAR score of 52 compares with an average of 72 across the 1,618 that report a score; it scores higher than 20% of them and lower than 79%. Its site EUI of 43.7 kBtu/ft² is about 14% below the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.3 kgCO₂e/ft² is about 13% above the group average of 3.8 kgCO₂e/ft².
At 50,000 sq ft, it is about 63% below the average floor area of 136,346 sq ft for those buildings. It was built in 1912, 53 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².
How has Monsenor Romero's energy performance changed over time?
BuildingCensus holds 2 Washington, DC disclosures for Monsenor Romero, covering report years 2016–2017. Its ENERGY STAR score went from 100 in 2016 to 52 in 2017 (-48 points); its best year on file was 2016, at 100. Site EUI moved from 23.8 kBtu/ft² (2016) to 43.7 kBtu/ft² (2017), an 84% increase. Reported emissions went from 98 tCO₂e to 214 tCO₂e over the same span (up 118%).
What does an ENERGY STAR score of 52 mean?
ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 52 means the building performs better than about 52% of its national peers. BuildingCensus bands the score into report-card grades; 52 falls in band D — lowest band (1–54). It sits 23 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.
Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Monsenor Romero's 43.7 kBtu/ft² across 50,000 sq ft works out to about 2.2 billion Btu (640 MWh-equivalent) in 2017. Its source EUI of 116.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 493,940 kWh of electricity, 5,002 therms of natural gas and 2,852 thousand gallons of water for the year.
Which law requires Monsenor Romero to report its energy use?
Monsenor Romero reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2017 disclosure (source record dc:PM5824467:2017). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.
More multifamily housing buildings in Washington, DC
- Kipling House Condominium· 49,863 sq ft · score 91 (A)
- Elysium Logan Condominium· 49,846 sq ft · score 79 (B)
- Bryn Mawr Condominium Association· 49,776 sq ft · score 86 (A)
- Eastbrooke· 49,711 sq ft
- Townley Court· 49,683 sq ft · EUI 7.3 kBtu/ft²
- Carthage Condominium· 49,665 sq ft · score 99 (A)
- Multifamily Housing buildings in Washington, DC· 1,799 benchmarked
- All Washington, DC benchmarked buildings· Clean and Affordable Energy Act / BEPS
- Most efficient large buildings in Washington, DC
- Least efficient large buildings in Washington, DC
- Biggest emitters in Washington, DC
Frequently asked questions
What is Monsenor Romero's energy grade?
Monsenor Romero scores 52 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2017 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.
How much energy does Monsenor Romero use?
Its 2017 site energy-use intensity was 43.7 kBtu/ft² (116.3 kBtu/ft² source) across 50,000 sq ft, including 493,940 kWh of electricity and 5,002 therms of natural gas.
What are Monsenor Romero's carbon emissions?
Monsenor Romero reported 214 tCO₂e of greenhouse-gas emissions (4.3 kgCO₂e/ft²) for 2017.
Where is Monsenor Romero?
Monsenor Romero is at 3145 Mount Pleasant St NW, in Washington, DC 20010. Its coordinates are 38.92986, -77.03757 (latitude, longitude), as published in the Building Energy Benchmarking file.
How big is Monsenor Romero and when was it built?
Monsenor Romero has 50,000 sq ft of gross floor area, as reported in its 2017 disclosure. The disclosure lists 1912 as its year built. It is classed as multifamily housing.
Is Monsenor Romero covered by the Clean and Affordable Energy Act / BEPS?
Yes — it appears in the 2017 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.
Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.
About this data
Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.
Cite as: BuildingCensus, “Monsenor Romero, Washington, DC — 2017 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/monsenor-romero-96aec73f (data as of July 9, 2026).