BuildingCensus
D

Parc Riverside-Toll Brothers

Multifamily Housing in Washington, DC, DC · 1011 1st ST SE · 20003

At a glance

Parc Riverside-Toll Brothers is a 271,944-square-foot multifamily housing building at 1011 1st ST SE in Washington, DC, built in 2014. In its 2020 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 47 out of 100 (grade D), a site energy-use intensity of 46.6 kBtu/ft² and 1,174 tCO₂e of greenhouse-gas emissions. That score is higher than 17% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
47
band D · 2020
Site EUI
46.6
kBtu/ft²
GHG emissions
1,174
tCO₂e
GHG intensity
4.3
kgCO₂e/ft²
Floor area
271,944
sq ft
Year built
2014
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2020

Benchmarking record

FieldValue
ENERGY STAR score47 (band D)
Site EUI46.6 kBtu/ft²
Source EUI124.6 kBtu/ft²
GHG emissions1,174 tCO₂e
GHG intensity4.3 kgCO₂e/ft²
Electricity3,444,317 kWh
Natural gas9,336 therms
Water use7,971 kgal
Gross floor area271,944 sq ft
Source recorddc:PM6414772:2020

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2020latest47-1746.6 kBtu/ft²1,174 tCO₂e
201964-944.2 kBtu/ft²1,110 tCO₂e
20187340.2 kBtu/ft²1,047 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

TOLL DC LP

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1011 1st ST SE
State
District of Columbia
ZIP
20003
Coordinates
38.87815, -77.00644

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Parc Riverside-Toll Brothers compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Parc Riverside-Toll Brothers's ENERGY STAR score of 47 compares with an average of 72 across the 1,618 that report a score; it scores higher than 17% of them and lower than 83%. Its site EUI of 46.6 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.3 kgCO₂e/ft² is about 13% above the group average of 3.8 kgCO₂e/ft².

At 271,944 sq ft, it is about twice the average floor area of 136,346 sq ft for those buildings. It was built in 2014, 49 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Parc Riverside-Toll Brothers's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for Parc Riverside-Toll Brothers, covering report years 2018–2020. Its ENERGY STAR score went from 73 in 2018 to 47 in 2020 (-26 points); its best year on file was 2018, at 73. Site EUI moved from 40.2 kBtu/ft² (2018) to 46.6 kBtu/ft² (2020), an 16% increase. Reported emissions went from 1,047 tCO₂e to 1,174 tCO₂e over the same span (up 12%).

What does an ENERGY STAR score of 47 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 47 means the building performs better than about 47% of its national peers. BuildingCensus bands the score into report-card grades; 47 falls in band D — lowest band (1–54). It sits 28 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Parc Riverside-Toll Brothers's 46.6 kBtu/ft² across 271,944 sq ft works out to about 12.7 billion Btu (3,714 MWh-equivalent) in 2020. Its source EUI of 124.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 3,444,317 kWh of electricity, 9,336 therms of natural gas and 7,971 thousand gallons of water for the year.

Which law requires Parc Riverside-Toll Brothers to report its energy use?

Parc Riverside-Toll Brothers reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2020 disclosure (source record dc:PM6414772:2020). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Parc Riverside-Toll Brothers's energy grade?

Parc Riverside-Toll Brothers scores 47 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2020 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Parc Riverside-Toll Brothers use?

Its 2020 site energy-use intensity was 46.6 kBtu/ft² (124.6 kBtu/ft² source) across 271,944 sq ft, including 3,444,317 kWh of electricity and 9,336 therms of natural gas.

What are Parc Riverside-Toll Brothers's carbon emissions?

Parc Riverside-Toll Brothers reported 1,174 tCO₂e of greenhouse-gas emissions (4.3 kgCO₂e/ft²) for 2020.

Where is Parc Riverside-Toll Brothers?

Parc Riverside-Toll Brothers is at 1011 1st ST SE, in Washington, DC 20003. Its coordinates are 38.87815, -77.00644 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Parc Riverside-Toll Brothers and when was it built?

Parc Riverside-Toll Brothers has 271,944 sq ft of gross floor area, as reported in its 2020 disclosure. The disclosure lists 2014 as its year built. It is classed as multifamily housing.

Is Parc Riverside-Toll Brothers covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2020 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Parc Riverside-Toll Brothers, Washington, DC — 2020 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/parc-riverside-toll-brothers-58e60f0a (data as of July 9, 2026).