BuildingCensus
D

Park Terrace

Multifamily Housing in Washington, DC, DC · 1660 Lanier Place, NW · 20009

At a glance

Park Terrace is a 79,273-square-foot multifamily housing building at 1660 Lanier Place, NW in Washington, DC, built in 1940. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 48 out of 100 (grade D), a site energy-use intensity of 86.3 kBtu/ft² and 412 tCO₂e of greenhouse-gas emissions. That score is higher than 17% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
48
band D · 2024
Site EUI
86.3
kBtu/ft²
GHG emissions
412
tCO₂e
GHG intensity
5.2
kgCO₂e/ft²
Floor area
79,273
sq ft
Year built
1940
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score48 (band D)
Site EUI86.3 kBtu/ft²
Source EUI121.9 kBtu/ft²
GHG emissions412 tCO₂e
GHG intensity5.2 kgCO₂e/ft²
Electricity415,294 kWh
Natural gas54,212 therms
Water use3,980 kgal
Gross floor area79,273 sq ft
Source recorddc:PM3997919:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest48±086.3 kBtu/ft²412 tCO₂e
202348-2182.8 kBtu/ft²396 tCO₂e
202269-276.3 kBtu/ft²364 tCO₂e
202171+1075.2 kBtu/ft²356 tCO₂e
202061-877.6 kBtu/ft²371 tCO₂e
201969+678.5 kBtu/ft²379 tCO₂e
201863+1284.5 kBtu/ft²410 tCO₂e
201751-478.2 kBtu/ft²364 tCO₂e
201655+974.9 kBtu/ft²367 tCO₂e
201546+3480.1 kBtu/ft²419 tCO₂e
201412114.4 kBtu/ft²550 tCO₂e
2013—101.7 kBtu/ft²496 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

THE MORRIS AND GWENDOLYN CAFRITZ FOUNDATION

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1660 Lanier Place, NW
State
District of Columbia
ZIP
20009
Coordinates
38.92608, -77.03922

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Park Terrace compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Park Terrace's ENERGY STAR score of 48 compares with an average of 72 across the 1,618 that report a score; it scores higher than 17% of them and lower than 82%. Its site EUI of 86.3 kBtu/ft² is about 69% above the average of 51.1 kBtu/ft² — it uses more energy per square foot than the typical building in that group. Its emissions intensity of 5.2 kgCO₂e/ft² is about 37% above the group average of 3.8 kgCO₂e/ft².

At 79,273 sq ft, it is about 42% below the average floor area of 136,346 sq ft for those buildings. It was built in 1940, 25 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Park Terrace's energy performance changed over time?

BuildingCensus holds 12 Washington, DC disclosures for Park Terrace, covering report years 2013–2024. Its ENERGY STAR score went from 12 in 2014 to 48 in 2024 (+36 points); its best year on file was 2021, at 71. Site EUI moved from 101.7 kBtu/ft² (2013) to 86.3 kBtu/ft² (2024), a 15% decrease. Reported emissions went from 496 tCO₂e to 412 tCO₂e over the same span (down 17%).

What does an ENERGY STAR score of 48 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 48 means the building performs better than about 48% of its national peers. BuildingCensus bands the score into report-card grades; 48 falls in band D — lowest band (1–54). It sits 27 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Park Terrace's 86.3 kBtu/ft² across 79,273 sq ft works out to about 6.8 billion Btu (2,005 MWh-equivalent) in 2024. Its source EUI of 121.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 415,294 kWh of electricity, 54,212 therms of natural gas and 3,980 thousand gallons of water for the year.

Which law requires Park Terrace to report its energy use?

Park Terrace reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM3997919:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Park Terrace's energy grade?

Park Terrace scores 48 out of 100 on ENERGY STAR — band D, lowest band (1–54) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Park Terrace use?

Its 2024 site energy-use intensity was 86.3 kBtu/ft² (121.9 kBtu/ft² source) across 79,273 sq ft, including 415,294 kWh of electricity and 54,212 therms of natural gas.

What are Park Terrace's carbon emissions?

Park Terrace reported 412 tCO₂e of greenhouse-gas emissions (5.2 kgCO₂e/ft²) for 2024.

Where is Park Terrace?

Park Terrace is at 1660 Lanier Place, NW, in Washington, DC 20009. Its coordinates are 38.92608, -77.03922 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Park Terrace and when was it built?

Park Terrace has 79,273 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1940 as its year built. It is classed as multifamily housing.

Is Park Terrace covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Park Terrace, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/park-terrace-a15bf209 (data as of July 9, 2026).