BuildingCensus
C

Parkchester

Multifamily Housing in Washington, DC, DC · 2704 Wade Road, SE 201 · 20020

At a glance

Parkchester is a 72,917-square-foot multifamily housing building at 2704 Wade Road, SE 201 in Washington, DC, built in 1952. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 57 out of 100 (grade C), a site energy-use intensity of 53.8 kBtu/ft² and 285 tCO₂e of greenhouse-gas emissions. That score is higher than 24% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
57
band C · 2024
Site EUI
53.8
kBtu/ft²
GHG emissions
285
tCO₂e
GHG intensity
3.9
kgCO₂e/ft²
Floor area
72,917
sq ft
Year built
1952
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score57 (band C)
Site EUI53.8 kBtu/ft²
Source EUI109.9 kBtu/ft²
GHG emissions285 tCO₂e
GHG intensity3.9 kgCO₂e/ft²
Electricity653,199 kWh
Natural gas16,917 therms
Water use9,022 kgal
Gross floor area72,917 sq ft
Source recorddc:PM4823346:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest57-753.8 kBtu/ft²285 tCO₂e
202364+751.5 kBtu/ft²260 tCO₂e
202257-1654.5 kBtu/ft²289 tCO₂e
202173+449.5 kBtu/ft²258 tCO₂e
202069±049.0 kBtu/ft²258 tCO₂e
201969+450.7 kBtu/ft²282 tCO₂e
201865-1153.1 kBtu/ft²303 tCO₂e
201776+4743.2 kBtu/ft²286 tCO₂e
201629-1065.4 kBtu/ft²429 tCO₂e
201539+1163.0 kBtu/ft²453 tCO₂e
20142866.5 kBtu/ft²484 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

WADE ROAD INVESTOR LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2704 Wade Road, SE 201
State
District of Columbia
ZIP
20020
Coordinates
38.85805, -76.99690

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Parkchester compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Parkchester's ENERGY STAR score of 57 compares with an average of 72 across the 1,618 that report a score; it scores higher than 24% of them and lower than 75%. Its site EUI of 53.8 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft². Its emissions intensity of 3.9 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 72,917 sq ft, it is about half of the average floor area of 136,346 sq ft for those buildings. It was built in 1952, 13 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Parkchester's energy performance changed over time?

BuildingCensus holds 11 Washington, DC disclosures for Parkchester, covering report years 2014–2024. Its ENERGY STAR score went from 28 in 2014 to 57 in 2024 (+29 points); its best year on file was 2017, at 76. Site EUI moved from 66.5 kBtu/ft² (2014) to 53.8 kBtu/ft² (2024), a 19% decrease. Reported emissions went from 484 tCO₂e to 285 tCO₂e over the same span (down 41%).

What does an ENERGY STAR score of 57 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 57 means the building performs better than about 57% of its national peers. BuildingCensus bands the score into report-card grades; 57 falls in band C — below median (55–69). It sits 18 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Parkchester's 53.8 kBtu/ft² across 72,917 sq ft works out to about 3.9 billion Btu (1,150 MWh-equivalent) in 2024. Its source EUI of 109.9 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 653,199 kWh of electricity, 16,917 therms of natural gas and 9,022 thousand gallons of water for the year.

Which law requires Parkchester to report its energy use?

Parkchester reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM4823346:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Parkchester's energy grade?

Parkchester scores 57 out of 100 on ENERGY STAR — band C, below median (55–69) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Parkchester use?

Its 2024 site energy-use intensity was 53.8 kBtu/ft² (109.9 kBtu/ft² source) across 72,917 sq ft, including 653,199 kWh of electricity and 16,917 therms of natural gas.

What are Parkchester's carbon emissions?

Parkchester reported 285 tCO₂e of greenhouse-gas emissions (3.9 kgCO₂e/ft²) for 2024.

Where is Parkchester?

Parkchester is at 2704 Wade Road, SE 201, in Washington, DC 20020. Its coordinates are 38.85805, -76.99690 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Parkchester and when was it built?

Parkchester has 72,917 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1952 as its year built. It is classed as multifamily housing.

Is Parkchester covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Parkchester, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/parkchester-92fe0eb8 (data as of July 9, 2026).