BuildingCensus
A

Presidential

Multifamily Housing in Washington, DC, DC · 1026 16th St NW · 20036

At a glance

Presidential is a 59,044-square-foot multifamily housing building at 1026 16th St NW in Washington, DC, built in 1923. In its 2024 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 92 out of 100 (grade A), a site energy-use intensity of 49.0 kBtu/ft² and 189 tCO₂e of greenhouse-gas emissions. That score is higher than 74% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
92
band A · 2024
Site EUI
49.0
kBtu/ft²
GHG emissions
189
tCO₂e
GHG intensity
3.2
kgCO₂e/ft²
Floor area
59,044
sq ft
Year built
1923
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2024

Benchmarking record

FieldValue
ENERGY STAR score92 (band A)
Site EUI49.0 kBtu/ft²
Source EUI81.4 kBtu/ft²
GHG emissions189 tCO₂e
GHG intensity3.2 kgCO₂e/ft²
Electricity295,681 kWh
Natural gas18,851 therms
Water use2,036 kgal
Gross floor area59,044 sq ft
Source recorddc:PM14836118:2024

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2024latest92+249.0 kBtu/ft²189 tCO₂e
202390-348.9 kBtu/ft²189 tCO₂e
202293+451.1 kBtu/ft²193 tCO₂e
202189-354.5 kBtu/ft²202 tCO₂e
202092+350.3 kBtu/ft²190 tCO₂e
20198955.4 kBtu/ft²207 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

PRESIDENTIAL OWNERS INC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1026 16th St NW
State
District of Columbia
ZIP
20036
Coordinates
38.90352, -77.03695

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Presidential compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. Presidential's ENERGY STAR score of 92 compares with an average of 72 across the 1,618 that report a score; it scores higher than 74% of them and lower than 24%. Its site EUI of 49.0 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.2 kgCO₂e/ft² is about 16% below the group average of 3.8 kgCO₂e/ft².

At 59,044 sq ft, it is about 57% below the average floor area of 136,346 sq ft for those buildings. It was built in 1923, 42 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has Presidential's energy performance changed over time?

BuildingCensus holds 6 Washington, DC disclosures for Presidential, covering report years 2019–2024. Its ENERGY STAR score went from 89 in 2019 to 92 in 2024 (+3 points); its best year on file was 2022, at 93. Site EUI moved from 55.4 kBtu/ft² (2019) to 49.0 kBtu/ft² (2024), a 12% decrease. Reported emissions went from 207 tCO₂e to 189 tCO₂e over the same span (down 9%).

What does an ENERGY STAR score of 92 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 92 means the building performs better than about 92% of its national peers. BuildingCensus bands the score into report-card grades; 92 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Presidential's 49.0 kBtu/ft² across 59,044 sq ft works out to about 2.9 billion Btu (848 MWh-equivalent) in 2024. Its source EUI of 81.4 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 295,681 kWh of electricity, 18,851 therms of natural gas and 2,036 thousand gallons of water for the year.

Which law requires Presidential to report its energy use?

Presidential reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM14836118:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is Presidential's energy grade?

Presidential scores 92 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2024 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Presidential use?

Its 2024 site energy-use intensity was 49.0 kBtu/ft² (81.4 kBtu/ft² source) across 59,044 sq ft, including 295,681 kWh of electricity and 18,851 therms of natural gas.

What are Presidential's carbon emissions?

Presidential reported 189 tCO₂e of greenhouse-gas emissions (3.2 kgCO₂e/ft²) for 2024.

Where is Presidential?

Presidential is at 1026 16th St NW, in Washington, DC 20036. Its coordinates are 38.90352, -77.03695 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Presidential and when was it built?

Presidential has 59,044 sq ft of gross floor area, as reported in its 2024 disclosure. The disclosure lists 1923 as its year built. It is classed as multifamily housing.

Is Presidential covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2024 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Presidential, Washington, DC — 2024 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/presidential-1f5e254b (data as of July 9, 2026).