BuildingCensus
A

St. Martin's Apartments LP

Multifamily Housing in Washington, DC, DC · 116 T Street · 20002

At a glance

St. Martin's Apartments LP is a 280,000-square-foot multifamily housing building at 116 T Street in Washington, DC. In its 2018 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 95 out of 100 (grade A), a site energy-use intensity of 24.7 kBtu/ft² and 649 tCO₂e of greenhouse-gas emissions. That score is higher than 82% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
95
band A · 2018
Site EUI
24.7
kBtu/ft²
GHG emissions
649
tCO₂e
GHG intensity
2.3
kgCO₂e/ft²
Floor area
280,000
sq ft
Year built
—
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2018

Benchmarking record

FieldValue
ENERGY STAR score95 (band A)
Site EUI24.7 kBtu/ft²
Source EUI67.3 kBtu/ft²
GHG emissions649 tCO₂e
GHG intensity2.3 kgCO₂e/ft²
Electricity1,935,982 kWh
Natural gas41,874 therms
Water use12,569 kgal
Gross floor area280,000 sq ft
Source recorddc:PM4556577:2018

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2018latest95+1724.7 kBtu/ft²649 tCO₂e
201778-536.2 kBtu/ft²898 tCO₂e
201683-236.2 kBtu/ft²929 tCO₂e
20158536.7 kBtu/ft²1,039 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

ST MARTIN'S APARTMENTS LP

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
116 T Street
State
District of Columbia
ZIP
20002
Coordinates
38.91575, -77.00531

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does St. Martin's Apartments LP compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. St. Martin's Apartments LP's ENERGY STAR score of 95 compares with an average of 72 across the 1,618 that report a score; it scores higher than 82% of them and lower than 16%. Its site EUI of 24.7 kBtu/ft² is about half of the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.3 kgCO₂e/ft² is about 39% below the group average of 3.8 kgCO₂e/ft².

At 280,000 sq ft, it is about twice the average floor area of 136,346 sq ft for those buildings. Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has St. Martin's Apartments LP's energy performance changed over time?

BuildingCensus holds 4 Washington, DC disclosures for St. Martin's Apartments LP, covering report years 2015–2018. Its ENERGY STAR score went from 85 in 2015 to 95 in 2018 (+10 points). Site EUI moved from 36.7 kBtu/ft² (2015) to 24.7 kBtu/ft² (2018), a 33% decrease. Reported emissions went from 1,039 tCO₂e to 649 tCO₂e over the same span (down 38%).

What does an ENERGY STAR score of 95 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 95 means the building performs better than about 95% of its national peers. BuildingCensus bands the score into report-card grades; 95 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. St. Martin's Apartments LP's 24.7 kBtu/ft² across 280,000 sq ft works out to about 6.9 billion Btu (2,027 MWh-equivalent) in 2018. Its source EUI of 67.3 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,935,982 kWh of electricity, 41,874 therms of natural gas and 12,569 thousand gallons of water for the year.

Which law requires St. Martin's Apartments LP to report its energy use?

St. Martin's Apartments LP reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2018 disclosure (source record dc:PM4556577:2018). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is St. Martin's Apartments LP's energy grade?

St. Martin's Apartments LP scores 95 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2018 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does St. Martin's Apartments LP use?

Its 2018 site energy-use intensity was 24.7 kBtu/ft² (67.3 kBtu/ft² source) across 280,000 sq ft, including 1,935,982 kWh of electricity and 41,874 therms of natural gas.

What are St. Martin's Apartments LP's carbon emissions?

St. Martin's Apartments LP reported 649 tCO₂e of greenhouse-gas emissions (2.3 kgCO₂e/ft²) for 2018.

Where is St. Martin's Apartments LP?

St. Martin's Apartments LP is at 116 T Street, in Washington, DC 20002. Its coordinates are 38.91575, -77.00531 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is St. Martin's Apartments LP and when was it built?

St. Martin's Apartments LP has 280,000 sq ft of gross floor area, as reported in its 2018 disclosure. It is classed as multifamily housing.

Is St. Martin's Apartments LP covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2018 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “St. Martin's Apartments LP, Washington, DC — 2018 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/st-martin-s-apartments-lp-8ad4ca45 (data as of July 9, 2026).