BuildingCensus
A

The Georgetown

Multifamily Housing in Washington, DC, DC · 2510-2514 Q St NW · 20007

At a glance

The Georgetown is a 82,286-square-foot multifamily housing building at 2510-2514 Q St NW in Washington, DC, built in 1924. In its 2015 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 87 out of 100 (grade A), a site energy-use intensity of 46.9 kBtu/ft² and 309 tCO₂e of greenhouse-gas emissions. That score is higher than 63% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
87
band A · 2015
Site EUI
46.9
kBtu/ft²
GHG emissions
309
tCO₂e
GHG intensity
3.8
kgCO₂e/ft²
Floor area
82,286
sq ft
Year built
1924
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2015

Benchmarking record

FieldValue
ENERGY STAR score87 (band A)
Site EUI46.9 kBtu/ft²
Source EUI82.0 kBtu/ft²
GHG emissions309 tCO₂e
GHG intensity3.8 kgCO₂e/ft²
Electricity377,799 kWh
Natural gas25,692 therms
Water use811 kgal
Gross floor area82,286 sq ft
Source recorddc:PM4528208:2015

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2015latest87+7446.9 kBtu/ft²309 tCO₂e
201413+178.0 kBtu/ft²538 tCO₂e
20131277.0 kBtu/ft²540 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

2512 ASSOCIATES

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
2510-2514 Q St NW
State
District of Columbia
ZIP
20007
Coordinates
38.91034, -77.05333

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does The Georgetown compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. The Georgetown's ENERGY STAR score of 87 compares with an average of 72 across the 1,618 that report a score; it scores higher than 63% of them and lower than 35%. Its site EUI of 46.9 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 3.8 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 82,286 sq ft, it is about 40% below the average floor area of 136,346 sq ft for those buildings. It was built in 1924, 41 years earlier than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has The Georgetown's energy performance changed over time?

BuildingCensus holds 3 Washington, DC disclosures for The Georgetown, covering report years 2013–2015. Its ENERGY STAR score went from 12 in 2013 to 87 in 2015 (+75 points). Site EUI moved from 77.0 kBtu/ft² (2013) to 46.9 kBtu/ft² (2015), a 39% decrease. Reported emissions went from 540 tCO₂e to 309 tCO₂e over the same span (down 43%).

What does an ENERGY STAR score of 87 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 87 means the building performs better than about 87% of its national peers. BuildingCensus bands the score into report-card grades; 87 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The Georgetown's 46.9 kBtu/ft² across 82,286 sq ft works out to about 3.9 billion Btu (1,131 MWh-equivalent) in 2015. Its source EUI of 82.0 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 377,799 kWh of electricity, 25,692 therms of natural gas and 811 thousand gallons of water for the year.

Which law requires The Georgetown to report its energy use?

The Georgetown reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2015 disclosure (source record dc:PM4528208:2015). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is The Georgetown's energy grade?

The Georgetown scores 87 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2015 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does The Georgetown use?

Its 2015 site energy-use intensity was 46.9 kBtu/ft² (82.0 kBtu/ft² source) across 82,286 sq ft, including 377,799 kWh of electricity and 25,692 therms of natural gas.

What are The Georgetown's carbon emissions?

The Georgetown reported 309 tCO₂e of greenhouse-gas emissions (3.8 kgCO₂e/ft²) for 2015.

Where is The Georgetown?

The Georgetown is at 2510-2514 Q St NW, in Washington, DC 20007. Its coordinates are 38.91034, -77.05333 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is The Georgetown and when was it built?

The Georgetown has 82,286 sq ft of gross floor area, as reported in its 2015 disclosure. The disclosure lists 1924 as its year built. It is classed as multifamily housing.

Is The Georgetown covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2015 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “The Georgetown, Washington, DC — 2015 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/the-georgetown-ff924fba (data as of July 9, 2026).