The Maren (mr264)

How does The Maren (mr264) compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. The Maren (mr264)'s ENERGY STAR score of 56 compares with an average of 72 across the 1,618 that report a score; it scores higher than 24% of them and lower than 76%. Its site EUI of 47.7 kBtu/ft² is roughly in line with the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.0 kgCO₂e/ft² is roughly in line with the group average of 3.8 kgCO₂e/ft².

At 261,811 sq ft, it is about twice the average floor area of 136,346 sq ft for those buildings. It was built in 2019, 54 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

How has The Maren (mr264)'s energy performance changed over time?

BuildingCensus holds 4 Washington, DC disclosures for The Maren (mr264), covering report years 2021–2024. Its ENERGY STAR score went from 93 in 2021 to 56 in 2024 (-37 points); its best year on file was 2022, at 96. Site EUI moved from 34.1 kBtu/ft² (2021) to 47.7 kBtu/ft² (2024), an 40% increase. Reported emissions went from 947 tCO₂e to 1,044 tCO₂e over the same span (up 10%).

What does an ENERGY STAR score of 56 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 56 means the building performs better than about 56% of its national peers. BuildingCensus bands the score into report-card grades; 56 falls in band C — below median (55–69). It sits 19 points below 75, the threshold for ENERGY STAR certification. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The Maren (mr264)'s 47.7 kBtu/ft² across 261,811 sq ft works out to about 12.5 billion Btu (3,660 MWh-equivalent) in 2024. Its source EUI of 123.6 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 3,222,646 kWh of electricity, 14,963 therms of natural gas and 6,888 thousand gallons of water for the year.

Which law requires The Maren (mr264) to report its energy use?

The Maren (mr264) reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2024 disclosure (source record dc:PM15685565:2024). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.