BuildingCensus
A

The SeVerna on K

Multifamily Housing in Washington, DC, DC · 43 K St NW · 20001

At a glance

The SeVerna on K is a 136,141-square-foot multifamily housing building at 43 K St NW in Washington, DC, built in 2014. In its 2016 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 98 out of 100 (grade A), a site energy-use intensity of 25.3 kBtu/ft² and 387 tCO₂e of greenhouse-gas emissions. That score is higher than 90% of the 1,618 scored multifamily housing buildings in Washington, DC.

ENERGY STAR score
98
band A · 2016
Site EUI
25.3
kBtu/ft²
GHG emissions
387
tCO₂e
GHG intensity
2.8
kgCO₂e/ft²
Floor area
136,141
sq ft
Year built
2014
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2016

Benchmarking record

FieldValue
ENERGY STAR score98 (band A)
Site EUI25.3 kBtu/ft²
Source EUI77.5 kBtu/ft²
GHG emissions387 tCO₂e
GHG intensity2.8 kgCO₂e/ft²
Electricity972,035 kWh
Natural gas1,287 therms
Water use2,995 kgal
Gross floor area136,141 sq ft
Source recorddc:PM5835837:2016

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

SEVERNA PHASE II LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
43 K St NW
State
District of Columbia
ZIP
20001
Coordinates
38.90282, -77.01155

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does The SeVerna on K compare with other multifamily housing buildings in Washington, DC?

The latest disclosures cover 1,799 multifamily housing buildings in Washington, DC, out of 6,870 buildings citywide. The SeVerna on K's ENERGY STAR score of 98 compares with an average of 72 across the 1,618 that report a score; it scores higher than 90% of them and lower than 8%. Its site EUI of 25.3 kBtu/ft² is about half of the average of 51.1 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 2.8 kgCO₂e/ft² is about 26% below the group average of 3.8 kgCO₂e/ft².

At 136,141 sq ft, it is roughly in line with the average floor area of 136,346 sq ft for those buildings. It was built in 2014, 49 years later than the group's average year built (1965). Across all 24 jurisdictions BuildingCensus covers, the 59,945 multifamily housing buildings average an ENERGY STAR score of 70 and a site EUI of 59.0 kBtu/ft².

What does an ENERGY STAR score of 98 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 98 means the building performs better than about 98% of its national peers. BuildingCensus bands the score into report-card grades; 98 falls in band A — high performer (85–100). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. The SeVerna on K's 25.3 kBtu/ft² across 136,141 sq ft works out to about 3.4 billion Btu (1,009 MWh-equivalent) in 2016. Its source EUI of 77.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 972,035 kWh of electricity, 1,287 therms of natural gas and 2,995 thousand gallons of water for the year.

Which law requires The SeVerna on K to report its energy use?

The SeVerna on K reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2016 disclosure (source record dc:PM5835837:2016). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More multifamily housing buildings in Washington, DC

Frequently asked questions

What is The SeVerna on K's energy grade?

The SeVerna on K scores 98 out of 100 on ENERGY STAR — band A, high performer (85–100) — in its 2016 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does The SeVerna on K use?

Its 2016 site energy-use intensity was 25.3 kBtu/ft² (77.5 kBtu/ft² source) across 136,141 sq ft, including 972,035 kWh of electricity and 1,287 therms of natural gas.

What are The SeVerna on K's carbon emissions?

The SeVerna on K reported 387 tCO₂e of greenhouse-gas emissions (2.8 kgCO₂e/ft²) for 2016.

Where is The SeVerna on K?

The SeVerna on K is at 43 K St NW, in Washington, DC 20001. Its coordinates are 38.90282, -77.01155 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is The SeVerna on K and when was it built?

The SeVerna on K has 136,141 sq ft of gross floor area, as reported in its 2016 disclosure. The disclosure lists 2014 as its year built. It is classed as multifamily housing.

Is The SeVerna on K covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2016 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “The SeVerna on K, Washington, DC — 2016 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/the-severna-on-k-7d918fc2 (data as of July 9, 2026).