BuildingCensus
B

Washington Cap Hill/NavyYd DC RI

Hotel in Washington, DC, DC · 1233 First Street SE · 20003

At a glance

Washington Cap Hill/NavyYd DC RI is a 124,585-square-foot hotel at 1233 First Street SE in Washington, DC, built in 2015. In its 2023 Washington, DC benchmarking disclosure it reported an ENERGY STAR score of 75 out of 100 (grade B), a site energy-use intensity of 62.5 kBtu/ft² and 599 tCO₂e of greenhouse-gas emissions. That score is higher than 71% of the 251 scored hotel buildings in Washington, DC.

ENERGY STAR score
75
band B · 2023
Site EUI
62.5
kBtu/ft²
GHG emissions
599
tCO₂e
GHG intensity
4.8
kgCO₂e/ft²
Floor area
124,585
sq ft
Year built
2015
vintage
◆ Loading map…
85–10070–8455–691–54
This entry + 6 nearby

Clean and Affordable Energy Act / BEPS · reporting year 2023

Benchmarking record

FieldValue
ENERGY STAR score75 (band B)
Site EUI62.5 kBtu/ft²
Source EUI136.5 kBtu/ft²
GHG emissions599 tCO₂e
GHG intensity4.8 kgCO₂e/ft²
Electricity1,479,724 kWh
Natural gas27,324 therms
Water use3,741 kgal
Gross floor area124,585 sq ft
Source recorddc:PM6707693:2023

The disclosure history

Year over year

YearScoreΔSite EUIGHG emissions
2023latest75-462.5 kBtu/ft²599 tCO₂e
202279-960.9 kBtu/ft²573 tCO₂e
202188-352.1 kBtu/ft²522 tCO₂e
20209146.7 kBtu/ft²487 tCO₂e

Compliance context

Clean and Affordable Energy Act / BEPS

DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

Program details →

Ownership

MILLSTONE POINT RE HOLDINGS LLC

Own or manage this building? Claim it to correct the record and get compliance alerts.

Location

Address
1233 First Street SE
State
District of Columbia
ZIP
20003
Coordinates
38.87592, -77.00620

Within ~1 km

Nearby benchmarked buildings

See also: most efficient in Washington, DC · biggest emitters

How does Washington Cap Hill/NavyYd DC RI compare with other hotel buildings in Washington, DC?

The latest disclosures cover 257 hotel buildings in Washington, DC, out of 6,870 buildings citywide. Washington Cap Hill/NavyYd DC RI's ENERGY STAR score of 75 compares with an average of 58 across the 251 that report a score; it scores higher than 71% of them and lower than 27%. Its site EUI of 62.5 kBtu/ft² is about 29% below the average of 87.6 kBtu/ft² — it uses less energy per square foot than the typical building in that group. Its emissions intensity of 4.8 kgCO₂e/ft² is about 30% below the group average of 6.9 kgCO₂e/ft².

At 124,585 sq ft, it is about half of the average floor area of 227,860 sq ft for those buildings. It was built in 2015, 41 years later than the group's average year built (1974). Across all 24 jurisdictions BuildingCensus covers, the 3,812 hotel buildings average an ENERGY STAR score of 65 and a site EUI of 77.8 kBtu/ft².

How has Washington Cap Hill/NavyYd DC RI's energy performance changed over time?

BuildingCensus holds 4 Washington, DC disclosures for Washington Cap Hill/NavyYd DC RI, covering report years 2020–2023. Its ENERGY STAR score went from 91 in 2020 to 75 in 2023 (-16 points); its best year on file was 2020, at 91. Site EUI moved from 46.7 kBtu/ft² (2020) to 62.5 kBtu/ft² (2023), an 34% increase. Reported emissions went from 487 tCO₂e to 599 tCO₂e over the same span (up 23%).

What does an ENERGY STAR score of 75 mean?

ENERGY STAR scores run from 1 to 100 and are computed by the EPA's Portfolio Manager as a percentile against similar buildings nationwide, adjusted for climate, size and use: a score of 75 means the building performs better than about 75% of its national peers. BuildingCensus bands the score into report-card grades; 75 falls in band B — above median (70–84). Scores of 75 or higher meet the threshold for ENERGY STAR certification; certification itself is a separate, verified application that the disclosure does not record. In Washington, DC, 47% of scored buildings are at 75 or above.

Site energy-use intensity (EUI) is the energy a building uses on site in a year divided by its floor area, in thousand Btu per square foot — lower is more efficient. Washington Cap Hill/NavyYd DC RI's 62.5 kBtu/ft² across 124,585 sq ft works out to about 7.8 billion Btu (2,282 MWh-equivalent) in 2023. Its source EUI of 136.5 kBtu/ft² also counts the energy lost generating and delivering that power, which is why it is higher. The disclosure also reports 1,479,724 kWh of electricity, 27,324 therms of natural gas and 3,741 thousand gallons of water for the year.

Which law requires Washington Cap Hill/NavyYd DC RI to report its energy use?

Washington Cap Hill/NavyYd DC RI reports under the Clean and Affordable Energy Act / BEPS, the legal basis of Washington, DC's Building Energy Benchmarking program, which publishes each covered building's annual benchmarking results. The record shown here is the report-year 2023 disclosure (source record dc:PM6707693:2023). DC's Building Energy Performance Standards (BEPS) require buildings below the performance standard to improve over compliance cycles (the first ends December 31, 2026; later cycles run five years), with penalties for buildings that fail to meet their pathway.

More hotel buildings in Washington, DC

Frequently asked questions

What is Washington Cap Hill/NavyYd DC RI's energy grade?

Washington Cap Hill/NavyYd DC RI scores 75 out of 100 on ENERGY STAR — band B, above median (70–84) — in its 2023 Washington, DC disclosure. Scores are national percentiles against similar buildings; 75+ qualifies for ENERGY STAR certification.

How much energy does Washington Cap Hill/NavyYd DC RI use?

Its 2023 site energy-use intensity was 62.5 kBtu/ft² (136.5 kBtu/ft² source) across 124,585 sq ft, including 1,479,724 kWh of electricity and 27,324 therms of natural gas.

What are Washington Cap Hill/NavyYd DC RI's carbon emissions?

Washington Cap Hill/NavyYd DC RI reported 599 tCO₂e of greenhouse-gas emissions (4.8 kgCO₂e/ft²) for 2023.

Where is Washington Cap Hill/NavyYd DC RI?

Washington Cap Hill/NavyYd DC RI is at 1233 First Street SE, in Washington, DC 20003. Its coordinates are 38.87592, -77.00620 (latitude, longitude), as published in the Building Energy Benchmarking file.

How big is Washington Cap Hill/NavyYd DC RI and when was it built?

Washington Cap Hill/NavyYd DC RI has 124,585 sq ft of gross floor area, as reported in its 2023 disclosure. The disclosure lists 2015 as its year built. It is classed as hotel.

Is Washington Cap Hill/NavyYd DC RI covered by the Clean and Affordable Energy Act / BEPS?

Yes — it appears in the 2023 Building Energy Benchmarking disclosure, which lists the buildings reporting under the Clean and Affordable Energy Act / BEPS.

Working with Washington, DC building benchmarking records? Pro adds alerts, change history and CSV export ($49/mo); Enterprise adds full national files, the API and an MCP server for AI tools.

About this data

Source: Building Energy Benchmarking (Clean and Affordable Energy Act / BEPS), as published July 9, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: BuildingCensus, “Washington Cap Hill/NavyYd DC RI, Washington, DC — 2023 benchmarking disclosure”, https://buildingcensus.com/buildings/washington-dc/washington-cap-hill-navyyd-dc-ri-3e9918c8 (data as of July 9, 2026).